NEMA Rating
Specifications
AMP1860LF Allied Moulded Products 18 x 16 x 10 Polycarbonate Enclosure with Hinged Cover and Snap Latch
Enclosure type | JIC Size |
---|---|
Cover Type | Opaque |
Closure Type | Metal Snap Latch |
Mounting Description | Nonmetal flange fastened to back side brass inserts |
Height | 18.04 in |
Width | 16.04 in |
Depth | 9.81 in |
Usable Depth | 10.27 in |
Volume | 3183 cu. in |
Weight | 12 lbs |
Color | Gray (RAL 7035) |
Material | Polycarbonate box and cover |
Additional Materials | 316 stainless steel external hardware (hinges/latches/fasteners), Polycarbonate mounting brackets, Plated carbon steel internal hardware, Brass inserts, Polyurethane (FIP) Formed-In-Place gasket system |
Features
AMP1860LF Allied Moulded Products 18 x 16 x 10 Polycarbonate Enclosure with Hinged Cover and Snap Latch
-
Non-corrosive, non-conductive, light weight with lower installation cost, easy to modify and longer life cycle compared to steel. Rigid design with back panel inserts plus nonmetallic mounting brackets and a gasket system encased in a continuous channel on the cover.
Application
AMP1860LF Allied Moulded Products 18 x 16 x 10 Polycarbonate Enclosure with Hinged Cover and Snap Latch
-
Enclose and protect electrial and electronic controls, instruments or components for indoor and outdoor applications. Especially well suited for extreme temperature and corrosive environments.
Standards
AMP1860LF Allied Moulded Products 18 x 16 x 10 Polycarbonate Enclosure with Hinged Cover and Snap Latch
UL 508A, UL 50 and UL 50E Types 1, 2, 3, 3R, 4, 4X, 12 and 13
Complies with:
1. EN / IEC 60204-1 and 60529 Type IP66
2. RoHS directive
Documents
Warranty Information
One Year “Bumper to Bumper” Warranty – Allied Moulded Products, Inc. warrants its Industrial Electrical Enclosures to be substantially free from defects in materials and workmanship when used in applications considered normal use for one year from the date of original shipment from our factory (or warehouse) or one year from documented field installation, not to exceed 24 months from the original shipment date from Allied Moulded. This “Bumper to Bumper” warranty covers the standard color fiberglass enclosure as well as hardware, modifications, and accessories supplied by Allied Moulded as part of the original enclosure.
This warranty expressly does not cover damage related to after-market or field modifications, repairs, misuse, handling, neglect, accident, improper storage, shipping damage, installation, or assembly damage.
Any enclosure deemed defective during the warranty period will be either repaired or replaced at Allied Moulded’s sole option. Repair or replacement of the enclosure in question along with any pre-approved, reasonable labor costs will constitute complete fulfillment of Allied Moulded’s liabilities.