Specification - Allied Moulded Products AMVENT4XLG
Specification - Allied Moulded Products AMVENT4XLG
| Mounting Description | 4 Screws |
|---|---|
| Height | 4.168 in |
| Width | 2.958 in |
| Depth | 0.746 in |
| Color | Gray (RAL 7035) |
| Material | Polycarbonate |
| Additional Materials | 316 stainless steel fasteners, Polyurethane (FIP) Formed-In-Place gasket system |
Features - Allied Moulded Products AMVENT4XLG
Features - Allied Moulded Products AMVENT4XLG
FIP gasket system with 316 stainless mounting fasteners for maintaining a NEMA 4X enclosure rating. Polycarbonate thermoplastic material for corrosion resistance and a durable external enclosure accessory. Innovative baffles allow air flow into the enclosure while preventing rain or hose directed spray from penetrating.
Application - Allied Moulded Products AMVENT4XLG
Application - Allied Moulded Products AMVENT4XLG
Enclosure accessory meant for free flow of air through enclosures to aid in venting/cooling equipment housed inside. Sold in pairs for best installed ventilation results. UL listed enclosure accessory when installed on a smooth flat enclosure surface.
Standards - Allied Moulded Products AMVENT4XLG
Standards - Allied Moulded Products AMVENT4XLG
- Meets Requirements: ANSI/UL50, ANSI/UL50E, and ANSI/UL508A
- UL® listed enclosure products Types 1, 2, 3, 3R, 4, 4X, 12 and 13.
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |
Related Products
Warranty Information
One Year “Bumper to Bumper” Warranty – Allied Moulded Products, Inc. warrants its Industrial Electrical Enclosures to be substantially free from defects in materials and workmanship when used in applications considered normal use for one year from the date of original shipment from our factory (or warehouse) or one year from documented field installation, not to exceed 24 months from the original shipment date from Allied Moulded. This “Bumper to Bumper” warranty covers the standard color fiberglass enclosure as well as hardware, modifications, and accessories supplied by Allied Moulded as part of the original enclosure.
This warranty expressly does not cover damage related to after-market or field modifications, repairs, misuse, handling, neglect, accident, improper storage, shipping damage, installation, or assembly damage.
Any enclosure deemed defective during the warranty period will be either repaired or replaced at Allied Moulded’s sole option. Repair or replacement of the enclosure in question along with any pre-approved, reasonable labor costs will constitute complete fulfillment of Allied Moulded’s liabilities.