SCE-MOD84X7818

SCE-MOD84X7818 Saginaw Control & Engineering 84 x 77.75 x 18 2DR MOD Enclosure

• 0.125 In. carbon steel.
• Seams continuously welded and ground smooth.
• Body stiffeners for extra rigidity.
• Door and side openings are flanged to provide extra strength and smooth edges.
• Flange trough collar around all sides of door opening.
• Heavy duty lifting eyes anchor into reinforced top.
• Concealed hinges.
• Removable and interchangeable doors.
• Black zinc die cast coinproof/padlocking handle on main door of disconnect enclosures. Black zinc die cast padlocking handle on all other doors.
• 3-point latching mechanism.
• Ramp shoe on ends of latch rods for easier door closing.
• Panel supports.
• Large removable print pockets.
• Pour in place oil & water resistant gasket
• Removable panels mount on collar studs.
• Mechanical interlock standard on each enclosure. Parts required to connect interlock system between adjacent enclosures are provided.
• Ground stud on door and body.
• Provisions for light kit.
• Holes plugs provided to seal holes in bottom of enclosure.

SCE-MOD84X7818 Saginaw Control & Engineering 84 x 77.75 x 18 2DR MOD Enclosure

Can be bolted together in any desired multiple door arrangement for maximum versatility. Slave enclosures can be added or removed as required. Designed to house most standard type disconnects. For outdoor application a drip shield and drain vent is recommended.

SCE-MOD84X7818 Saginaw Control & Engineering 84 x 77.75 x 18 2DR MOD Enclosure

ANSI-61 gray powder coating inside and out. Sub-panels are powder coated white.
Part numbers ending in "G" have galvanized subpanels installed.

SCE-MOD84X7818 Saginaw Control & Engineering 84 x 77.75 x 18 2DR MOD Enclosure

• NEMA Type 3R, 12 and Type 13
• UL Listed Type 3R and 12
• CSA Type 3R and 12
• IEC 60529
• IP 55