SCE-EXD18

SCE-EXD18 Saginaw Control & Engineering 34.5 x 15 x 18 External Disconnect Enclosure

• 0.075 In. carbon steel.
• Seams continuously welded and ground smooth.
• Flange trough collar around all sides of door opening.
• Pour in place oil & water resistant gasket
• Collar studs provided for mounting panels.
• 31in. H X 13in. W Galvanized Subpanel installed.
• Concealed hinge.
• Black quarter turn latches.
• Latches are opened or closed with a screwdriver.
• Mounting hardware included.
• Mechanical interlock and hardware included.
• Mechanical interlock activated by the External Disconnect prevents main door of the enclosure from being closed unless the EXD enclosure is first closed.
• Mechanical interlock activated by master door prevents slave doors from being opened first. Doors can be closed in any order.
• Provision for 200 amp disconnect or less (Ref. D1 Cutout) - for use with Allen Bradley, Square D and Eaton (FHS) models only

SCE-EXD18 Saginaw Control & Engineering 34.5 x 15 x 18 External Disconnect Enclosure

Designed for use with enclosures that require additional protection against Arc Flash. This enclosure can be used with an environmentally rated enclosure to isolate the main power supply. Increasing personal protection by preventing incidental contact or exposure to the high voltage arc flash and shock hazard, and potentially reducing the PPE level for the lower risk components of the main enclosure. The External Disconnect Enclosure can be incorporated into a new system. Aids in achieving compliance with NFPA 70E by concealing main power supply.

SCE-EXD18 Saginaw Control & Engineering 34.5 x 15 x 18 External Disconnect Enclosure

ANSI-61 gray powder coating inside and out.
SS 304 Stainless steel with #4 Brushed finish.

SCE-EXD18 Saginaw Control & Engineering 34.5 x 15 x 18 External Disconnect Enclosure

• NEMA Type 3R, 4, 12 and Type 13
• UL Listed Type 3R, 4 and 12
• CSA Type 3R, 4 and 12
• IEC 60529
• IP 66