Construction
Construction
SCE-86ML3D20 Saginaw Control & Engineering 86 x 112.5 x 20 3DR Left Multi-Door Enclosure
- 0.125 In. carbon steel.
- Seams continuously welded and ground smooth.
- Heavy duty lifting eyes.
- Reinforced top.
- Steel stiffeners welded to back inside of enclosure.
- Overlapping two-door openings have no center post.
- Black zinc die cast padlocking handle.
- 3-point latching mechanism.
- Concealed hinges.
- Mechanical interlock.
- Far right hand door is main door.
- Panel supports.
- Interior print pocket.
- Removable panels are mounted on collar studs.
- Provisions for light kit.
- Pour in place oil & water resistant gasket
- Ground stud on door and body.
- Removable print pocket.
- Flange trough collar around all sides of door opening.
- Hole plugs provided to seal holes in bottom of enclosure.
- Collar studs 3/8-16 provided for mounting panels.
Application
Application
SCE-86ML3D20 Saginaw Control & Engineering 86 x 112.5 x 20 3DR Left Multi-Door Enclosure
Designed to house electrical equipment and provide protection from dirt, dust, oil and water. For outdoor application a drip shield and drain vent is recommended.
Finish
Finish
SCE-86ML3D20 Saginaw Control & Engineering 86 x 112.5 x 20 3DR Left Multi-Door Enclosure
ANSI-61 gray powder coating inside and out. Sub-panels are powder coated white.
Industry Standards
Industry Standards
SCE-86ML3D20 Saginaw Control & Engineering 86 x 112.5 x 20 3DR Left Multi-Door Enclosure
- NEMA Type 3R, 12 and Type 13
- UL Listed Type 3R and 12
- CSA Type 3R and 12
- IEC 60529
- IP 55
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |