NEMA Rating
Construction
SCE-86M3E20 Saginaw Control & Engineering 86 x 112 x 20 Enclosure, Multi-Door
- 0.125 In. carbon steel.
- Seams continuously welded and ground smooth.
- Heavy duty lifting eyes.
- Reinforced top.
- Steel stiffeners welded to back inside of enclosure.
- Overlapping two-door openings have no center post.
- Black zinc die cast padlocking handle.
- 3-point latching mechanism.
- Concealed hinges.
- Mechanical interlock.
- Far right hand door is main door.
- Panel supports.
- Interior print pocket.
- Removable panels are mounted on collar studs.
- Provisions for light kit.
- Pour in place oil & water resistant gasket
- Ground stud on door and body.
- Removable print pocket.
- Flange trough collar around all sides of door opening.
- Hole plugs provided to seal holes in bottom of enclosure.
- Collar studs 3/8-16 provided for mounting panels.
Application
SCE-86M3E20 Saginaw Control & Engineering 86 x 112 x 20 Enclosure, Multi-Door
Designed to house electrical equipment and provide protection from dirt, dust, oil and water. For outdoor application a drip shield and drain vent is recommended.
Finish
SCE-86M3E20 Saginaw Control & Engineering 86 x 112 x 20 Enclosure, Multi-Door
ANSI-61 gray powder coating inside and out. Sub-panels are powder coated white.
Industry Standards
SCE-86M3E20 Saginaw Control & Engineering 86 x 112 x 20 Enclosure, Multi-Door
- NEMA Type 3R, 12 and Type 13
- UL Listed Type 3R and 12
- CSA Type 3R and 12
- IEC 60529
- IP 55