- SKU:
- AMP1860
- Weight:
- 12.00 LBS
- Width:
- 16.04 in
- Height:
- 18.04 in
- Depth:
- 9.81 in
- Dimensions:
- 18in x 16in x 10in
- Material:
- Polycarbonate
- Enclosure Type:
- Wall Mounted
- Cover Type:
- Opaque
- Closure Type:
- 4-Screw Lift-Off
- Mounting Type:
- Nonmetal Feet
Representative Image Shown
AMP1860
Polycarbonate Enclosure with Lift-Off Screw Cover and Stainless-Steel Snap Latch
$127.99
Factory New
Allied Moulded Products
Allied Moulded, NEMA 4X rated, Polyline Series, 18"x16"x10", Wall Mounted Enclosure Assembly
Representative Image Shown
Trusted Accessories
Versions (16)
Product Details
Features
Features
Non-corrosive, non-conductive, light weight with lower installation cost, easy to modify and longer life cycle compared to steel. Rigid design with back panel inserts plus nonmetallic mounting brackets and a gasket system encased in a continuous channel on the cover.
Application
Application
Enclose and protect electrical and electronic controls, instruments or components for indoor and outdoor applications. Especially well suited for extreme temperature and corrosive environments.
Standards
Standards
- UL 508A, UL 50 and UL 50E Types 1, 2, 3, 3R, 4, 4X, 12 and 13
- Complies with:
1. EN / IEC 60204-1 and 60529 Type IP66
2. RoHS directive
Specifications
Specifications
| Enclosure Type | JIC Size |
| Cover Type | Opaque |
| Closure Type | 4-Screw Lift-Off |
| Mounting Description | Nonmetal feet fastened to back side brass inserts |
| Height | 18.04 in (458.216 mm) |
| Width | 16.04 in (407.416 mm) |
| Depth | 9.81 in (249.174 mm) |
| Usable Depth | 10.27 in (260.858 mm) |
| Volume | 3183 cu in (52160139.3 cu mm) |
| Color | Gray (RAL 7035) |
| Material | Polycarbonate box and cover |
| Additional Materials | 316 stainless steel external hardware (hinges/latches/fasteners), Polycarbonate mounting brackets, Plated carbon steel internal hardware, Brass inserts, Polyurethane (FIP) Formed-In-Place gasket system |
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |
Versions (16)
Complete My Build
Inner Panels
Related Products
Warranty Information
Manufacturer Warranty: One Year “Bumper to Bumper” Warranty – Allied Moulded Products, Inc. warrants its Industrial Electrical Enclosures to be substantially free from defects in materials and workmanship when used in applications considered normal use for one year from the date of original shipment from our factory (or warehouse) or one year from documented field installation, not to exceed 24 months from the original shipment date from Allied Moulded. This “Bumper to Bumper” warranty covers the standard color fiberglass enclosure as well as hardware, modifications, and accessories supplied by Allied Moulded as part of the original enclosure.
This warranty expressly does not cover damage related to after-market or field modifications, repairs, misuse, handling, neglect, accident, improper storage, shipping damage, installation, or assembly damage.
Any enclosure deemed defective during the warranty period will be either repaired or replaced at Allied Moulded’s sole option. Repair or replacement of the enclosure in question along with any pre-approved, reasonable labor costs will constitute complete fulfillment of Allied Moulded’s liabilities.