NEMA Rating
Features
Non-corrosive, non-conductive, light weight with lower installation cost, easy to modify and longer life cycle compared to steel. Rigid design with back panel inserts plus nonmetallic mounting brackets and a gasket system encased in a continuous channel on the cover.
Application
Enclose and protect electrical and electronic controls, instruments or components for indoor and outdoor applications. Especially well suited for extreme temperature and corrosive environments.
Standards
- UL 508A, UL 50 and UL 50E Types 1, 2, 3, 3R, 4, 4X, 12 and 13
- CSA C22.2 No. 94 Types 1, 2, 3, 3R, 4, 4X, 12 and 13
- Complies with:
- EN / IEC 60204-1 and 60529 Type IP66
- RoHS directive
Specifications
| Enclosure Type | JIC Size |
|---|---|
| Cover Type | Opaque |
| Closure Type | Metal Snap Latch |
| Mounting Description | Nonmetal flange fastened to back side brass inserts |
| Height | 11.93 in (303.022 mm) |
| Width | 10.15 in (257.81 mm) |
| Depth | 5.94 in (150.876 mm) |
| Usable Depth | 6.06 in (153.924 mm) |
| Volume | 829 cu. in. (13584905.9 cu mm) |
| Color | Gray (RAL 7035) |
| Material | Polycarbonate box and cover |
| Additional Materials | 316 stainless steel external hardware (hinges/latches/fasteners), Polycarbonate mounting brackets, Plated carbon steel internal hardware, Brass inserts, Polyurethane (FIP) Formed-In-Place gasket system |
Documents
Warranty Information
Manufacturer Warranty: One Year “Bumper to Bumper” Warranty – Allied Moulded Products, Inc. warrants its Industrial Electrical Enclosures to be substantially free from defects in materials and workmanship when used in applications considered normal use for one year from the date of original shipment from our factory (or warehouse) or one year from documented field installation, not to exceed 24 months from the original shipment date from Allied Moulded. This “Bumper to Bumper” warranty covers the standard color fiberglass enclosure as well as hardware, modifications, and accessories supplied by Allied Moulded as part of the original enclosure.
This warranty expressly does not cover damage related to after-market or field modifications, repairs, misuse, handling, neglect, accident, improper storage, shipping damage, installation, or assembly damage.
Any enclosure deemed defective during the warranty period will be either repaired or replaced at Allied Moulded’s sole option. Repair or replacement of the enclosure in question along with any pre-approved, reasonable labor costs will constitute complete fulfillment of Allied Moulded’s liabilities.
Related Products
AMP1206F
$67.47
$82.29
Polycarbonate Enclosure with Lift-Off Screw Cover and Stainless-Steel Snap Latch
12in x 10in x 6in
AMP1206H
$68.56
$83.62
Polycarbonate Enclosure with Hinged Screw Cover and Stainless-Steel Snap Latch
12in x 10in x 6in
AMP1206HF
$72.00
$87.80
Polycarbonate Enclosure with Hinged Screw Cover and Stainless-Steel Snap Latch
12in x 10in x 6in
AMP1206L
$77.17
$94.11
Polycarbonate Enclosure with Hinged Cover and Stainless-Steel Snap Latch
12in x 10in x 6in
AMP1206NL
$73.33
$89.42
Polycarbonate Enclosure with Hinged Cover and Nonmetal Snap Latch
12in x 10in x 6in
AMP1206NLF
$76.85
$93.90
Polycarbonate enclosure with hinged cover and nonmetal snap latch
12in x 10in x 6in
AMP1206CC
$70.69
$86.20
Polycarbonate Enclosure with Screw Cover and Stainless-Steel Snap Latch
12in x 10in x 6in
AMP1206CCF
$74.22
$90.51
Polycarbonate Enclosure with Screw Cover and Stainless-Steel Snap Latch
12in x 10in x 6in
AMP1206CCH
$75.44
$91.99
Polycarbonate Enclosure with Hinged Screw Cover and Stainless-Steel Snap Latch
12in x 10in x 6in