- SKU:
- AMP1206CCH
- Weight:
- 5.00 LBS
- Width:
- 10.15 in
- Height:
- 11.93 in
- Depth:
- 5.94 in
- Dimensions:
- 12in x 10in x 6in
- Material:
- Polycarbonate
- Enclosure Type:
- Wall Mounted
- Cover Type:
- Clear Polycarbonate
- Closure Type:
- 2-Screw
- Mounting Type:
- Nonmetal Feet
Representative Image Shown
AMP1206CCH
Polycarbonate Enclosure with Hinged Screw Cover and Stainless-Steel Snap Latch
$77.99
Factory New
Allied Moulded Products
Allied Moulded, NEMA 4X rated, Polyline Series, 12"x10"x6", Wall Mounted Enclosure Assembly
Representative Image Shown
Replacement
Alternative
Product Details
Complete Your Build
verified
Verified fit
These products are compatible with the
Inner Panels
Fans
Filters
Heaters
Ventilation
Mounting
Build My Enclosure
Total price: $0
Features- Allied Moulded Products AMP1206CCH
Features- Allied Moulded Products AMP1206CCH
Non-corrosive, non-conductive, light weight with lower installation cost, easy to modify and longer life cycle compared to steel. Rigid design with back panel inserts plus nonmetallic mounting brackets and a gasket system encased in a continuous channel on the cover.
Applications- Allied Moulded Products AMP1206CCH
Applications- Allied Moulded Products AMP1206CCH
Enclose and protect electrical and electronic controls, instruments or components for indoor and outdoor applications. Especially well suited for extreme temperature and corrosive environments.
Standards- Allied Moulded Products AMP1206CCH
Standards- Allied Moulded Products AMP1206CCH
- UL 508A, UL 50 and UL 50E Types 1, 2, 3, 3R, 4, 4X, 12 and 13
- Complies with:
1. EN / IEC 60204-1 and 60529 Type IP66
2. RoHS directive
Specifications- Allied Moulded Products AMP1206CCH
Specifications- Allied Moulded Products AMP1206CCH
| Enclosure Type | JIC Size |
| Cover Type | Clear Polycarbonate |
| Closure Type | 2-Screw |
| Mounting Description | Nonmetal feet fastened to back side brass inserts |
| Height | 11.93 in (303.022 mm) |
| Width | 10.15 in (257.81 mm) |
| Depth | 5.94 in (150.876 mm) |
| Usable Depth | 6.06 in (153.924 mm) |
| Volume | 829 cu in (13584905.9 cu mm) |
| Material | Polycarbonate box and clear polycarbonate cover |
| Additional Materials | 316 stainless steel external hardware (hinges/latches/fasteners), Polycarbonate mounting brackets, Plated carbon steel internal hardware, Brass inserts, Polyurethane (FIP) Formed-In-Place gasket system |
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |
Complete My Build
Inner Panels
Alternative
Related Products
Warranty Information
Manufacturer Warranty: One Year “Bumper to Bumper” Warranty – Allied Moulded Products, Inc. warrants its Industrial Electrical Enclosures to be substantially free from defects in materials and workmanship when used in applications considered normal use for one year from the date of original shipment from our factory (or warehouse) or one year from documented field installation, not to exceed 24 months from the original shipment date from Allied Moulded. This “Bumper to Bumper” warranty covers the standard color fiberglass enclosure as well as hardware, modifications, and accessories supplied by Allied Moulded as part of the original enclosure.
This warranty expressly does not cover damage related to after-market or field modifications, repairs, misuse, handling, neglect, accident, improper storage, shipping damage, installation, or assembly damage.
Any enclosure deemed defective during the warranty period will be either repaired or replaced at Allied Moulded’s sole option. Repair or replacement of the enclosure in question along with any pre-approved, reasonable labor costs will constitute complete fulfillment of Allied Moulded’s liabilities.