HMI Cover Kit with hinged clear cover and snap latch
Representative Image Shown

Product Condition: New
5.00 LBS
8.15 in
7.93 in
0.96 in
8in x 8in x 1in
Cover Type:
Clear Polycarbonate
Closure Type:
Metal Snap Latch
Mounting Type:
8 Screws

NEMA Rating

  • N1
    Protection from fingers, tools and small objects
  • N12
    Protection from dust and light splashes of water
  • N3R
    Protection from rain, snow and sleet
  • N4
    Protection from rain, snow, sleet, and hose directed water
  • N4X
    Protected from rain, snow, sleet, and pressure rated hose directed water from all angles

Specifications - Allied Moulded Products AMHMI88CCL

Cover Type Clear Polycarbonate
Closure Type Metal Snap Latch
Mounting Description 8 Screws
Height 7.93 in (201.422 mm)
Width 8.15 in (207.01 mm)
Depth 0.96 in (24.384 mm)
Usable Depth 2.27 in (57.658 mm)
Color Gray (RAL 7035) with clear cover
Material Polycarbonate frame and clear polycarbonate cover
Additional Materials 316 stainless steel external hardware, Polyurethane (FIP) Formed-In-Place gasket system

Features - Allied Moulded Products AMHMI88CCL

  • Non-corrosive, non-conductive, light weight with lower installation cost and longer life cycle cost compared to steel. Rigid design with a gasket system encased in a continuous channel on the cover and frame. Open back frame design with an opening size of 6.47″ x 6.69″ and is UL listed for use with Type 4X enclosures. Will fit Allied Moulded enclosure sizes 10" x 12" and larger.

Application - Allied Moulded Products AMHMI88CCL

  • Cover and protect electrical and electronic controls including HMI (Human Machine Interface) instruments, touch pad controllers and pushbuttons mounted on the surface of Type 4X enclosures. No need to open the enclosure to view electronics or perform maintenance, decreasing arc flash risks and safety hazards.

Standards - Allied Moulded Products AMHMI88CCL

  • Meets Requirements: ANSI/UL50, ANSI/UL50E, and ANSI/UL508A
  • UL® listed and recognized component for use with CSA® listed enclosure products Types 1, 2, 3, 3R, 4, 4X, 12 and 13.
  • Complies With:
    1. EN / IEC 60204-1 and 60529 Type IP66
    2. RoHS directive

Warranty Information

Manufacturer Warranty: One Year “Bumper to Bumper” Warranty – Allied Moulded Products, Inc. warrants its Industrial Electrical Enclosures to be substantially free from defects in materials and workmanship when used in applications considered normal use for one year from the date of original shipment from our factory (or warehouse) or one year from documented field installation, not to exceed 24 months from the original shipment date from Allied Moulded. This “Bumper to Bumper” warranty covers the standard color fiberglass enclosure as well as hardware, modifications, and accessories supplied by Allied Moulded as part of the original enclosure. This warranty expressly does not cover damage related to after-market or field modifications, repairs, misuse, handling, neglect, accident, improper storage, shipping damage, installation, or assembly damage. Any enclosure deemed defective during the warranty period will be either repaired or replaced at Allied Moulded’s sole option. Repair or replacement of the enclosure in question along with any pre-approved, reasonable labor costs will constitute complete fulfillment of Allied Moulded’s liabilities.

Related Products