AMHMI164L

AMHMI164L Allied Moulded Products HMI Cover Kit with Hinged Cover and Snap Latch

Cover Type	Opaque
Closure Type	Metal Snap Latch
Mounting Description	10 Screws
Height	15.87 in
Width	14.07 in
Depth	0.96 in
Usable Depth	2.2 in
Volume	491 cu. in.
Weight	7 lb
Color	Gray (RAL 7035)
Material	Polycarbonate frame and cover
Additional Materials	316 stainless steel external hardware, Polyurethane (FIP) Formed-In-Place gasket system

AMHMI164L HMI Cover Kit with Hinged Cover and Snap Latch

• Non-corrosive, non-conductive, light weight with lower installation cost and longer life cycle cost compared to steel. Rigid design with a gasket system encased in a continuous channel on the cover and frame. Open back frame design with an opening size of 14.49″ x 12.71″ and is a UL recognized component for use with NEMA 4X enclosures. *Will fit Allied Moulded enclosure sizes 18â€?x16â€? and larger.

AMHMI164L HMI Cover Kit with Hinged Cover and Snap Latch

• Cover and protect electrical and electronic controls including HMI (Human Machine Interface) instruments, touch pad controllers and pushbuttons mounted on the surface of NEMA 4X enclosures. No need to open the enclosure to view electronics or perform maintenance, decreasing arc flash risks and safety hazards.

AMHMI164L HMI Cover Kit with Hinged Cover and Snap Latch

Meets Requirements: ANSI/UL50, ANSI/UL50E, and ANSI/UL508A; File No. E487574

UL® listed and recognized component for use with enclosure products Types 1, 2, 3, 3R, 4, 4X, 12 and 13.

Complies With:
1. EN / IEC 60204-1 and 60529 Type IP66
2. RoHS directive

One Year “Bumper to Bumper” Warranty – Allied Moulded Products, Inc. warrants its Industrial Electrical Enclosures to be substantially free from defects in materials and workmanship when used in applications considered normal use for one year from the date of original shipment from our factory (or warehouse) or one year from documented field installation, not to exceed 24 months from the original shipment date from Allied Moulded. This “Bumper to Bumper” warranty covers the standard color fiberglass enclosure as well as hardware, modifications, and accessories supplied by Allied Moulded as part of the original enclosure. This warranty expressly does not cover damage related to after-market or field modifications, repairs, misuse, handling, neglect, accident, improper storage, shipping damage, installation, or assembly damage. Any enclosure deemed defective during the warranty period will be either repaired or replaced at Allied Moulded’s sole option. Repair or replacement of the enclosure in question along with any pre-approved, reasonable labor costs will constitute complete fulfillment of Allied Moulded’s liabilities.