• Home
  • Enclosures
  • 1422N4F24F Hammond Manufacturing 72in x 72in x 24in Type 4 Mild Steel Two Door Enclosure with Continuous Hinge Doors and Clamps
1422N4F24F Hammond Manufacturing 72in x 72in x 24in Type 4 Mild Steel Two Door Enclosure with Continuous Hinge Doors and Clamps
Representative image shown

1422N4F24F

Type 4 Mild Steel Two Door Enclosure with Continuous Hinge Doors and Clamps

$5,750.95
Factory New

Hammond, 1422 N4 FM Series, Type 4 Mild Steel Two Door Floormount Enclosure, Continuous Hinge Door with Clamps, N4 Dbl Door Floormount Encl w/panel, 72 x 72 x 24, Steel/Gray, UL 508A Type 3R, 4 and 12, Inner panel included

1422N4F24F Hammond Manufacturing 72in x 72in x 24in Type 4 Mild Steel Two Door Enclosure with Continuous Hinge Doors and Clamps
Representative image shown

Trusted Accessories

- +

Versions (6)

Product Details
SKU:
1422N4F24F
UPC:
623980433776
Weight:
930.00 LBS
Width:
72.06 in
Height:
84.13 in
Depth:
25.88 in
Dimensions:
72in x 72in x 24in
Material:
Mild Steel
Enclosure Type:
Free Standing
Cover Type:
Opaque
Closure Type:
Stainless Steel Screw Clamp
Mounting Type:
Floor Mounted
  • Application
  • Standards
  • Construction
  • Finish
  • Documents

Application

Application
  • Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
  • Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.

Standards

Standards
  • UL 508A Type 3R, 4 and 12
  • CSA Type 3R, 4 and 12
  • Complies with
    • NEMA Type 3R, 4 12 and 13
    • IEC 60529, IP66

Construction

Construction
  • Enclosures are formed steel - 12 gauge (60" high) or combination 10/12 gauge (72" high).
  • Smooth, continuously welded seams without knockouts, cutouts or holes.
  • Body stiffeners are provided in the larger enclosures for extra rigidity.
  • Heavy duty lifting eyebolts are provided with reinforcing support angles.
  • Center post is removable for easy installation of the inner panel.
  • Formed lip on door and top of enclosure opening exclude flowing liquids and contaminants.
  • Continuously hinged doors may be removed by pulling the stainless steel hinge pin.
  • Doors are secured with heavy duty stainless steel clamps.
  • Provision for padlocking.
  • 12" floor stands are welded to the enclosure.
  • Seamless poured-in place gasket.
  • Provision for light kit mounting.
  • A removable 10 gauge inner panel is included.
  • Panel supports are provided for easy panel installation.
  • Collar studs are provided for mounting inner panels.
  • A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door.
  • A literature pocket is provided for the inside of the door.

Finish

Finish
  • Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
  • Removable white inner panel is finished in white powder coating.

Documents for

NEMA Rating for

Nema active
N1
Indoor
Protection from fingers, tools and small objects
Nema active
N12
Indoor
Protection from dust and light splashes of water
Nema active
N3R
Outdoor
Protection from rain, snow and sleet
Nema active
N4
Outdoor
Protection from rain, snow, sleet, and hose directed water
Nema not active
N4X
Outdoor
Protected from rain, snow, sleet, and pressure rated hose directed water from all angles
N1 graphic N12 graphic N3R graphic N4 graphic N4X graphic
+
Environments Type 1 Type 12 Type 3R Type 4 Type 4X
Indoor use only
Indoor and outdoor use
Falling liquids and light splashes
Nonhazardous dust, lint, and fibers
Washdowns and splashing water
Oil and coolant seepage
Corrosive agents
Hazardous locations
(Class I, Division 1 and 2)

Versions (6)

Related Products

Add To Cart
Add To Cart
Add To Cart
Add To Cart
Add To Cart

Warranty Information

Manufacturer Warranty: All products manufactured by Hammond are warrant to be free from defects in materials and workmanship for a period of one (1) year from date of shipment from its plant. If within such period any such goods shall be proven to Hammond’s satisfaction to be defective, such goods shall be repaired or replaced at Hammond’s option. Such corrections or replacement of defective goods shall constitute a fulfillment of all liabilities in respect to such goods. Under no circumstances will credit be allowed for unauthorized rework on any materials. Please contact your local Hammond Representative for warranty information pertaining to any Hammond offered product not manufactured by Hammond. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hammond shall not be liable for damages to goods, property, or persons due to improper installation or through attempts to utilize the goods under conditions which exceed the designed capabilities.