ZPSA-600-EH1-FR4 Yaskawa UL Type 1 External Heatsink Adapter

This option will change an open-chassis type (IP20) drive to an enclosed wall-mounted type (UL Type 1) drive. This option will let you install the drive outside the enclosure panel as an enclosed wall mounted type drive. The option has a bracket that will prevent damage to the wiring and a top protective cover that will not let unwanted material get in the drive. You can use this option when the installation environment of the drive meets the specifications shown in Installation Environment on page 8.

This installation kit is compatible with these drives:

GA700
GA800
CH700
CR700
HV600
FP605

Installation Environment

Area of Use	Indoors
Power Supply	Overvoltage Category III
Ambient Temperature Setting	IP20/UL Open Type: -10 °C to +50 °C (14 °F to 122 °F) IP20/UL Type 1: -10 °C to +40 °C (14 °F to 104 °F) Drive reliability is better in environments where the temperature does not increase or decrease quickly. When you install the drive in an enclosure, use a cooling fan or air conditioner to keep the internal air temperature in the permitted range. Do not let the drive freeze. You can use IP20/UL Open Type drives at a maximum of 60 °C (140 °F) when you derate the output current. You can use IP20/UL Type 1 drives at a maximum of 50 °C (122 °F) when you derate the output current.
Humidity	95% RH or less. Do not let condensation form on the drive.
Storage Temperature	-20 °C to +70 °C (-4 °F to +158 °F) (short-term temperature during transportation)
Surrounding Area	Pollution degree 2 or less Install the drive in an area without: Oil mist, corrosive or flammable gas, or dust Metal powder, oil, water, or other unwanted materials Radioactive or flammable materials. Harmful gas or fluids Salt Direct sunlight Keep wood and other flammable materials away from the drive
Altitude	1000 m (3281 ft) Maximum Note: Derate the output current by 1% for each 100 m (328 ft) to install the drive in altitudes between 1000 m to 4000 m (3281 ft to 13123 ft). It is not necessary to derate the rated voltage in these conditions: Installing the drive at 2000 m (6562 ft) or lower Installing the drive between 2000 m to 4000 m (6562 ft to 13123 ft) and grounding the neutral point on the power supply. Contact Yaskawa or your nearest sales representative if you will not ground the neutral point.
Vibration	10 Hz to 20 Hz: 0.6 G (5.9 m/s2, 19.30 ft/s2) 20 Hz to 55 Hz: Different for different models. Refer to the manual packaged with the drive.
Installation Orientation	Install the drive vertically for sufficient airflow to cool the drive.

Documents

Yaskawa AC Drive Option External Heatsink Installation Kit Installation Manual