S801+V65N3S

The Eaton S811+/S801+ soft starter family delivers solid performance beyond standard protection features found in most soft starters. Choosing a soft starter will increase your productivity and reduce your costs by:

• Eliminating abrupt starts and stops, extending mechanical life of system • Better control of motor torque, increasing gearbox and bearing life, reducing belt wear and eliminating water hammer
• Lowering inrush, reducing peak demand charges
• Reducing brownouts and decreasing overall energy usage
• Integrating overload protection
• Reducing number of devices, panel size, installation time and assembly costs with internal run bypass contactors

Smaller Size

The S811+/S801+ units are among the smallest starters in the industry. Reducing enclosure size for new production units, and enabling easier retrofits, minimizes the system costs

Severe Duty Capable

The S811+/S801+ soft starters have been time tested in various applications and environments. This family features conformally coated boards suitable for harsh environments. Kick-start function enables soft starting of high inertia loads.

Integrated Advanced Intelligence

High levels of protection are built into the S811+/S801+ soft starters.

• Protective features: electronic overload, jam, stall, SCR over-temperature, phase loss, phase imbalance, automatic or manual reset, phase reversal, shorted SCR detection, open SCR detection, undercurrent, under-voltage, over-voltage, diagnostics

Packaged Options

Packaged S811+/S801+ units give you more starting torque and more motor current in dramatically reduced enclosures. Enclosed soft starter units are up to 78 percent smaller, and MCC units are up to 63 percent smaller, than competitive offerings.

Product Length / Depth	23.5 in
Product Height	11.5 in
Product Width	16.5 in
Product Weight	108 lb
Certifications	IEC 60947-4-2 EN 60947-4-2 UL Listed UL Recognized CSA file No. 3211-06 CSA Certified for Elevator Duty
Type	Soft starter
Initial Torque	0–85%
Ramp Time Range	0.5–180 seconds
Soft Stop Time Range	0–60 seconds
Kick-Start Time Range	0–2 seconds
Vibration Resistance - non-operating	3 g
Vibration Resistance - operating	3 g
Shock Resistance	15 g
Operating Voltage	200–600 V (T-, V-Frame—up to 690 V)
Overload Setting (frame)	30–100% FLA
Trip Class	5, 10, 20, 30
Voltage Range (24V ±10%)	21.6–26.4 V
Steady-State Current	1 A
In-Rush Current	10 A
Voltage AC - maximum	230 V
Voltage DC - maximum	24 V
Amperes - maximum	3 A
Temperature - operating	–30 °C to +50 °C
Temperature - storage	–50 °C to +70 °C
Altitude	<2000 m
Humidity	<95% noncondensing
Operating Position	Any
Pollution Degree (IEC947-1)	3
Impulse Withstand Voltage (IEC947-4-1)	6000 V

Manufacturer's Warranty: Eaton Selling Policy 25-000, one (1) year from the date of installation of the Product or eighteen (18) months from the date of shipment of the Product, whichever occurs first.