Description
Description
Signaling contacts SK1-K with Push-in spring terminals signal the tripping of the manual motor starter. For SK1 the indication on the device itself is done with a protruding orange button. The contact positions of SK1 need to be manually reset after a tripping event by pushing the orange button. SK1-K signaling contacts signal tripping regardless if it was caused by short-circuit, overload or electrical release (AA1 or UA1). They are attached on the right side of the manual motor starter. Signaling contacts SK1-K are available as normally open or normally closed contacts.
Specifications
Specifications
Technical |
|
| Rated Operational Voltage: |
690 V AC
600 V DC
Main Circuit 690 V
|
| Rated Impulse Withstand Voltage (Uimp): | Auxiliary Circuit 6 kV |
| Rated Insulation Voltage (Ui): | 690 V |
| Power Loss: | at Rated Operating Conditions AC-15 per Pole 0.2 W |
| Number of Auxiliary Contacts NC: | 0 |
| Number of Auxiliary Contacts NO: | 2 |
| Degree of Protection: | IP20 |
| Electrical Durability: | 100000 cycle |
| Mechanical Durability: | Nr. Operations 100000 cycle |
| Terminal Type: | Push-in Spring Terminals |
| Connecting Capacity Auxiliary Circuit: |
Flexible with Ferrule 1/2x 0.5 ... 2.5 mm²
Flexible with Insulated Ferrule 1/2x 0.5 ... 1.5 mm²
Flexible 1/2x 0.5 ... 2.5 mm²
Rigid 1/2x 0.5 ... 2.5 mm²
|
| Wire Stripping Length: | Auxiliary Circuit 10 mm |
| Recommended Screw Driver: | M3 |
| Mounting Position: | 1 ... 6 |
Technical UL/CSA |
|
| Maximum Operating Voltage UL/CSA: | Main Circuit 600 V AC |
| Connecting Capacity Auxiliary Circuit UL/CSA: |
Rigid 1/2x 20-14 AWG
Stranded 1/2x 20-14 AWG
|
| Contact Rating UL/CSA: |
B600
Q600
|
Environmental |
|
| Ambient Air Temperature: |
Operation -25 ... +60 °C
Storage -50 ... +80 °C
|
| Resistance to Shock acc. to IEC 60068-2-27: | 11 ms Pulse 25g |
| Resistance to Vibrations: | 5g 3 ... 150 Hz |
