Features
KRF0036ATB TCI Radio Frequency Interference RFI Filter (3 Phase, 36A, 200- 480V)
Reduce High Frequency Distortion
KRF filters use a combination of high frequency inductors and capacitors to reduce noise in the critical 150 kHz to 30 MHz frequency range. The inductors act as open circuits and the capacitors act as short circuits at high frequencies while allowing the lower power line frequencies to pass untouched.
KRF filters assist with cost effective compliance to EMC directives, in a compact, efficient, light-weight design. The high common mode and differential mode reduction in the critical 150 kHz to 30 MHz frequency range ensures that potential interference from AC drives is reduced or eliminated
- Reduces interference
- Protects sensitive equipment
- Eliminates drive cross-talk
- Meet FCC Regulation 15, Subpart J
Applications
KRF0036ATB TCI Radio Frequency Interference RFI Filter (3 Phase, 36A, 200- 480V)
Applications of KRF filters include:
- Motor Drives
- Elevators
- Commercial Buildings
- Wind Farms
- Photovoltaics
- UPS
- Power Supplies
Equipment Interference and Failure
KRF0036ATB TCI Radio Frequency Interference RFI Filter (3 Phase, 36A, 200- 480V)
The power line noise emissions associated with variable frequency drives can cause disturbances in nearby equipment. Typical disturbances include:
- Dimmer and ballast instability
- Lighting disturbances such as flashing
- Poor radio reception
- Instability of control systems
- Flow metering fluctuation
- Computer system failures
- Remote I/O glitches
- Encoder feedback errors
- Nuisance faults PLC
- Analog meter bouncing
- Thermostat control problems
Specfications
KRF0036ATB TCI Radio Frequency Interference RFI Filter (3 Phase, 36A, 200- 480V)
System Voltage | 480 VAC (applied to 240 VAC - 520 VAC) |
---|---|
Amp Ratings | 36 Amps |
Number of Phases | 3 Phase |
Termination | Termination Block |
Short Term Overload Rating | 150% rated I for 3 minutes/60 minutes or 250% for 3 seconds/60 minutes |
Tested Value | 100% tested for Hipot, ground continuity, input-output continuity and insertion loss characteristic |
Fundamental Frequency | 50/60 Hz |
Warranty | 1 year |
Ambient Temperature | -25° to 100° C |
Maximum Altitude | Up to 1,000 m (3,300 ft) without derating |
Agency Approvals | ENEC, UL Recognized |