SCE-MOD844018G

SCE-MOD844018G Saginaw Control & Engineering 84 x 40 x 18 1DR MOD Enclosure

• 0.125 In. carbon steel.
• Seams continuously welded and ground smooth.
• Body stiffeners for extra rigidity.
• Door and side openings are flanged to provide extra strength and smooth edges.
• Flange trough collar around all sides of door opening.
• Heavy duty lifting eyes anchor into reinforced top.
• Concealed hinges.
• Removable and interchangeable doors.
• Black zinc die cast coinproof/padlocking handle on main door of disconnect enclosures. Black zinc die cast padlocking handle on all other doors.
• 3-point latching mechanism.
• Ramp shoe on ends of latch rods for easier door closing.
• Panel supports.
• Large removable print pockets.
• Pour in place oil & water resistant gasket
• Removable panels mount on collar studs.
• Mechanical interlock standard on each enclosure. Parts required to connect interlock system between adjacent enclosures are provided.
• Ground stud on door and body.
• Provisions for light kit.
• Holes plugs provided to seal holes in bottom of enclosure.

SCE-MOD844018G Saginaw Control & Engineering 84 x 40 x 18 1DR MOD Enclosure

Can be bolted together in any desired multiple door arrangement for maximum versatility. Slave enclosures can be added or removed as required. For outdoor application a drip shield and drain vent is recommended.

SCE-MOD844018G Saginaw Control & Engineering 84 x 40 x 18 1DR MOD Enclosure

ANSI-61 gray powder coating inside and out. Sub-panels are powder coated white.
Part numbers ending in "G" have galvanized subpanels installed.

SCE-MOD844018G Saginaw Control & Engineering 84 x 40 x 18 1DR MOD Enclosure

• NEMA Type 3R, 12 and Type 13
• UL Listed Type 3R and 12
• CSA Type 3R and 12
• IEC 60529
• IP 55