Construction
Construction
SCE-9PBHSS6 Saginaw Control & Engineering 10.125 x 10 x 6 S.S. PB Enclosure
- 0.063 In. stainless steel type 316/316L.
- Seams continously welded and ground smooth.
- Captivated cover screws thread into sealed wells.
- 4-way standard pushbutton holes accept all brands of oil-tight pushbuttons, switches and pilot lights. Hole diameter is 1.20 In. (30.5 mm).
- Pour in place oil & water resistant gasket
- Provisions for sub-panel.
- Ground stud on door.
- Cover attached with continuous hinges.
- Welded mounting provision top and bottom of back.
Application
Application
SCE-9PBHSS6 Saginaw Control & Engineering 10.125 x 10 x 6 S.S. PB Enclosure
Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil.
Finish
Finish
SCE-9PBHSS6 Saginaw Control & Engineering 10.125 x 10 x 6 S.S. PB Enclosure
#4 brushed finish on all exterior surfaces. Optional sub-panels are powder coated white.
Industry Standards
Industry Standards
SCE-9PBHSS6 Saginaw Control & Engineering 10.125 x 10 x 6 S.S. PB Enclosure
- NEMA Type 4, 4X, 12 and Type 13
- UL Listed Type 4, 4X and 12
- CSA Type 4, 4X and 12
- IEC 60529
- IP 66
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |