SCE-90XDR2D24G

SCE-90XDR2D24G Saginaw Control & Engineering 90 x 78.75 x 24 2DR Right XD Enclosure

• 0.125 In. carbon steel.
• Seams continuously welded and ground smooth.
• Flange trough collar around all sides of door opening.
• Body stiffeners in large enclosures for extra rigidity.
• Heavy duty lifting eyes anchor into reinforced top.
• Removable center post to permit easy sub-panel installation.
• Concealed hinges.
• Black zinc die cast padlocking handles.
• 3-point latching mechanism.
• Large removable print pockets.
• Pour in place oil & water resistant gasket
• Removable panels are mounted on collar studs.
• Defeater on master door requires a screwdriver to open.
• Mechanical interlock activated by the External Disconnect prevents main door of the enclosure from being closed unless the EXD enclosure is first closed.
• Mechanical interlock activated by master door prevents slave doors from being opened first. Doors can be closed in any order.
•  Ground stud on door & body.
• Provisions for light kit.

SCE-90XDR2D24G Saginaw Control & Engineering 90 x 78.75 x 24 2DR Right XD Enclosure

This enclosure is designed to be the right most enclosure in a large multi-door enclosure.

Designed to house the main power supply in external enclosure on the right side of main enclosure, keeping the live side of the power supply separate from the primary electrical equipment. Provides protection from dirt, dust, oil and water and can house most standard type disconnects. For outdoor application a drip shield and drain vent is recommended.

SCE-90XDR2D24G Saginaw Control & Engineering 90 x 78.75 x 24 2DR Right XD Enclosure

ANSI-61 gray powder coating inside and out. Sub-panels are powder coated white.
Part numbers ending in "G" have galvanized subpanels installed.

SCE-90XDR2D24G Saginaw Control & Engineering 90 x 78.75 x 24 2DR Right XD Enclosure

• NEMA Type 3R, 12 and Type 13
• UL Listed Type 3R and 12
• CSA Type 3R and 12
• IEC 60529
• IP 55