SCE-84XMR2D18G

SCE-84XMR2D18G Saginaw Control & Engineering 84 x 78.75 x 18 2DR Right XM Enclosure

• 0.125 in. carbon steel.
• Seams continuously welded and ground smooth.
• Flange trough collar around all sides of door opening.
• Body stiffeners in large enclosures for extra rigidity.
• Heavy duty lifting eyes anchor into reinforced top.
• Removable centerposts permit easy panel installation.
• Concealed hinges.
• Black die cast coinproof/padlocking handle on main door with black zinc die cast padlocking handle on slave door.
• 3-point latching mechanism.
•  Ends of latch rods have ramp shoes for easier door closing.
• Panel supports.
• Large removable print pocket.
•  Pour in place oil & water resistant gasket.
• Removable panels mount on collar studs.
• Master door is far right-hand door on all enclosures.
• Defeater on master door requires a screwdriver to open.
• Mechanical interlock activated by master door prevents slave doors from being opened first. Doors can be closed in any order.
• Ground stud on door and body.
• Provisions for light kit.
•  Holes plugs provided to seal holes in bottom of enclosure.

SCE-84XMR2D18G Saginaw Control & Engineering 84 x 78.75 x 18 2DR Right XM Enclosure

This enclosure is designed to be the right most enclosure in a large multi-door disconnect enclosure.

Designed to house electrical equipment and provide protection from dirt, dust, oil and water and to house most standard type disconnects. For outdoor application a drip shield and drain vent is recommended.

SCE-84XMR2D18G Saginaw Control & Engineering 84 x 78.75 x 18 2DR Right XM Enclosure

ANSI-61 gray powder coating inside and out. Sub-panels are powder coated white.
Part numbers ending in "G" have galvanized subpanels installed.

SCE-84XMR2D18G Saginaw Control & Engineering 84 x 78.75 x 18 2DR Right XM Enclosure

• NEMA Type 3R, 12 and Type 13
• UL Listed Type 3R and 12
• CSA Type 3R and 12
• IEC 60529
• IP 55