Construction
Construction
SCE-72XEL6118SSLP Saginaw Control & Engineering 72 x 61 x 18 S.S. 2DR XEL Enclosure
- 0.104 In. stainless steel Type 304.
- Seams continuously welded and ground smooth.
- Pour in place oil & water resistant gasket
- Flange trough collar around all sides of door opening.
- Stainless steel concealed hinges.
- Removable and interchangeable doors.
- 3-point latching mechanism.
- Removable print pocket.
- Lifting eyes for easy handling.
- Ground studs on door and body.
- Collar studs 3/8-16 provided for mounting optional panels.
- 15 In. removable floor stands.
- Removable center post.
- Mechanical interlock.
- No door stiffeners required.
- Black zinc die cast coinproof/padlocking handle on main door of disconnect enclosures. Black zinc die cast padlocking handle on all other doors.
- Provisions for light kit.
Application
Application
SCE-72XEL6118SSLP Saginaw Control & Engineering 72 x 61 x 18 S.S. 2DR XEL Enclosure
Designed to house electrical and electronic controls, instrumentation and components in indoor & outdoor locations. Designed to house most standard type disconnects. For outdoor application a drip shield and drain vent is recommended.
Finish
Finish
SCE-72XEL6118SSLP Saginaw Control & Engineering 72 x 61 x 18 S.S. 2DR XEL Enclosure
#4 brushed finish on all exterior surfaces. Optional sub-panels are powder coated white.
Industry Standards
Industry Standards
SCE-72XEL6118SSLP Saginaw Control & Engineering 72 x 61 x 18 S.S. 2DR XEL Enclosure
- NEMA Type 3R, 4, 4X, 12 and Type 13
- UL Listed Type 3R, 4, 4X and 12
- CSA Type 4, 4X and 12
- IEC 60529
- IP 66
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |