Construction
Construction
SCE-6PBXVLI Saginaw Control & Engineering 14.75 x 4 x 4.75 PBX Enclosure
- 0.063 In. carbon steel.
- Continuously welded seams.
- Captivated cover screws thread into sealed wells.
- 4-way standard pushbutton holes accept all brands of oil-tight pushbuttons, switches, and pilot lights. Hole diameter is 0.87 In. (22.5mm).
- Immediate removal of cover is still permitted.
- Pour in place oil & water resistant gasket
- Welded mounting provision top and bottom of back.
Application
Application
SCE-6PBXVLI Saginaw Control & Engineering 14.75 x 4 x 4.75 PBX Enclosure
Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil.
Finish
Finish
SCE-6PBXVLI Saginaw Control & Engineering 14.75 x 4 x 4.75 PBX Enclosure
ANSI-61 gray powder coating inside and out.
Industry Standards
Industry Standards
SCE-6PBXVLI Saginaw Control & Engineering 14.75 x 4 x 4.75 PBX Enclosure
- NEMA Type 12 and Type 13
- UL Listed Type 12
- CSA Type 12
- IEC 60529
- IP 55
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |