SCE-60XEL3716SSLP

SCE-60XEL3716SSLP Saginaw Control & Engineering 60 x 37.375 x 16 S.S. XEL Enclosure

• 0.075 In. stainless steel Type 304.
• Seams continuously welded and ground smooth.
• Flange trough collar around all sides of door opening.
• Pour in place oil & water resistant gasket
• Collar studs 3/8-16 provided for mounting optional panels.
• Holes provided in body for mounting disconnect operating handle and operating mechanism.
• Stainless steel concealed hinges.
• Doors are interchangeable and easily removed by pulling hinge pin.
• 3-point latching mechanism when door height is greater or equal to 40 inches, 2-point latching mechanism when door height is less than 40 inches.
• Latches are opened or closed with screwdriver (optional tamper-resistant inserts available).
• Mounting holes in back of enclosure.
• Mounting hardware, sealing washer and hole plug included.
• Ground studs on door and body.
• Black zinc die cast coinproof/padlocking handle.
• Removable print pocket.

SCE-60XEL3716SSLP Saginaw Control & Engineering 60 x 37.375 x 16 S.S. XEL Enclosure

Designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions. Designed to house most standard type disconnects. Provides protection from dust, dirt, oil, and water. For outdoor application a drip shield and drain vent is recommended.

SCE-60XEL3716SSLP Saginaw Control & Engineering 60 x 37.375 x 16 S.S. XEL Enclosure

SCE-60XEL3716SSLP Saginaw Control & Engineering 60 x 37.375 x 16 S.S. XEL Enclosure

• NEMA Type 3R, 4, 4X, 12 and Type 13
• UL Listed Type 3R, 4, 4X and 12
• CSA Type 4, 4X and 12
• IEC 60529
• IP 66