NEMA Rating
Construction
SCE-60XEL3708LP Saginaw Control & Engineering 60 x 37.375 x 8 XEL LP Enclosure
- 0.075 In. carbon steel.
- Seams continuously welded and ground smooth.
- Flange trough collar around all sides of door opening.
- Pour in place oil & water resistant gasket
- Collar studs 3/8-16 provided for mounting optional panels.
- Disconnect cutout provided on flange.
- Concealed hinges.
- Doors are interchangeable and easily removed by pulling hinge pins.
- 3-point latching mechanism when door height is greater or equal to 40 inches, 2-point latching mechanism when door height is less than 40 inches.
- Latches are opened or closed with a screwdriver (optional tamper-resistant inserts are available).
- Mounting holes on back of enclosure.
- Mounting hardware, sealing washer and hole plug included.
- Ground studs on door and body.
- Black zinc die cast coinproof/padlocking handle.
- Removable print pocket.
Application
SCE-60XEL3708LP Saginaw Control & Engineering 60 x 37.375 x 8 XEL LP Enclosure
Designed to house electrical and electronic controls, instruments and components. Provides protection from dust, oil and water. Designed to house most standard type disconnects. For outdoor application a drip shield and drain vent is recommended.
Finish
SCE-60XEL3708LP Saginaw Control & Engineering 60 x 37.375 x 8 XEL LP Enclosure
ANSI-61 gray powder coating inside and out. Optional sub-panels are powder coated white.
Industry Standards
SCE-60XEL3708LP Saginaw Control & Engineering 60 x 37.375 x 8 XEL LP Enclosure
- NEMA Type 3R, 4, 12 and Type 13
- UL Listed Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- IEC 60529
- IP 66
Related Products
