Construction
Construction
SCE-60EL3612SSST Saginaw Control & Engineering 60 x 36 x 12 S.S. EL Sloping Top Enclosure
- 0.075 In. stainless steel Type 304.
- Seams continuously welded and ground smooth.
- Flange trough collar around all sides of door opening.
- 15 degree sloping top.
- Collar studs 3/8-16 provided for mounting optional panels.
- Mounting holes in back of the enclosure for wall mounting.
- Mounting hardware, sealing washers and hole plugs included.
- Stainless Steel Concealed hinges.
- Removable and interchangeable doors.
- Black quarter turn latches.
- Latches are opened or closed with a screwdriver (optional tamper resistant latches are available)
- Removable print pocket furnished if height and width of enclosure is greater than 12 inches.
- Pour in place oil & water resistant gasket
- Ground stud on door and body.
- Provision for Lifting Lugs will be included on enclosures with Height >48 In. and with Depth >16 In. The Lifting Lug assembly will be included with the enclosure bolt pack.
Application
Application
SCE-60EL3612SSST Saginaw Control & Engineering 60 x 36 x 12 S.S. EL Sloping Top Enclosure
Designed to house electrical and electronic controls, instrumentation and components in indoor, outdoor and sanitary locations.
Finish
Finish
SCE-60EL3612SSST Saginaw Control & Engineering 60 x 36 x 12 S.S. EL Sloping Top Enclosure
#4 brushed finish on all exterior surfaces. Optional sub-panels are powder coated white.
Industry Standards
Industry Standards
SCE-60EL3612SSST Saginaw Control & Engineering 60 x 36 x 12 S.S. EL Sloping Top Enclosure
- NEMA Type 3R, 4, 4X, 12 and Type 13
- UL Listed Type 3R, 4, 4X and 12
- CSA Type 4, 4X and 12
- IEC 60529
- IP 66
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |