Construction
Construction
SCE-4PBSSI Saginaw Control & Engineering 10.25 x 3.25 x 2.75 S.S. PB Enclosure
- 0.063 In. stainless steel Type 304.
- Seams continuously welded and ground smooth.
- Captivated cover screws thread into sealed wells.
- 4-way standard pushbutton holes accept all brands of oil-tight pushbuttons, switches and pilot lights. Hole diameter is 0.87 In. (22.5mm).
- Immediate removal of cover is permitted.
- Pour in place oil & water resistant gasket
- Welded mounting provision top and bottom of back.
Application
Application
SCE-4PBSSI Saginaw Control & Engineering 10.25 x 3.25 x 2.75 S.S. PB Enclosure
Designed to house standard pushbuttons, switches and pilot lights in wet and hosed down areas and in corrosive atmospheres.
Options
Options
SCE-4PBSSI Saginaw Control & Engineering 10.25 x 3.25 x 2.75 S.S. PB Enclosure
Finish
Finish
SCE-4PBSSI Saginaw Control & Engineering 10.25 x 3.25 x 2.75 S.S. PB Enclosure
#4 brushed finish on all exterior surfaces.
Industry Standards
Industry Standards
SCE-4PBSSI Saginaw Control & Engineering 10.25 x 3.25 x 2.75 S.S. PB Enclosure
- NEMA Type 4, 4X, 12 and Type 13
- UL Listed Type 4, 4X and 12
- CSA Type 4, 4X and 12
- IEC 60529
- IP 66
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |