Construction
Construction
SCE-30EL3012LPPL Saginaw Control & Engineering 30 x 30 x 12 EL LPPL Enclosure
- 0.075 In. carbon steel.
- Seams continuously welded and ground smooth.
- Flange trough collar around all sides of door opening.
- Collar studs provided for mounting optional sub-panels.
- Mounting holes in back of enclosure for wall mounting.
- Mounting hardware, sealing washer and hole plugs included.
- Concealed hinges.
- Removable and interchangeable doors.
- Black zinc die cast keylocking/padlocking handle.
- 3-point latching mechanism.
- Black quarter turn latches as required.
- Removable print pocket.
- Pour in place oil & water resistant gasket
- Ground stud on door & body.
Application
Application
SCE-30EL3012LPPL Saginaw Control & Engineering 30 x 30 x 12 EL LPPL Enclosure
Designed to house electrical and electronic controls, instrumentation and components in indoor or outdoor locations. For outdoor application a drip shield and drain vent is recommended.
Finish
Finish
SCE-30EL3012LPPL Saginaw Control & Engineering 30 x 30 x 12 EL LPPL Enclosure
ANSI-61 gray powder coating inside and out. Optional sub-panels are powder coated white.
Industry Standards
Industry Standards
SCE-30EL3012LPPL Saginaw Control & Engineering 30 x 30 x 12 EL LPPL Enclosure
- NEMA Type 3R, 4, 12 and Type 13
- UL Listed Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- IEC 60529
- IP 66
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |