Construction
Construction
SCE-30EL2412SS6LP Saginaw Control & Engineering 30 x 24 x 12 S.S. EL Enclosure
- 0.075 In. stainless steel Type 316/316L.
- Seams continuously welded and ground smooth.
- Flange trough collar around all sides of door opening.
- Pour in place oil & water resistant gasket.
- Collar studs provided for mounting optional panels.
- Stainless steel concealed hinges.
- Removable and interchangeable doors.
- Black quarter turn latches.
- Latches are opened or closed with a screwdriver (optional tamper-resistant inserts are available).
- Mounting holes in back of enclosure.
- Mounting hardware, sealing washer and hole plug included.
- Removable print pocket furnished if height and width of enclosure is greater than 12 inches.
- Ground studs on door and body.
Application
Application
SCE-30EL2412SS6LP Saginaw Control & Engineering 30 x 24 x 12 S.S. EL Enclosure
Designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions. Provides protection from dust, dirt, oil, and water. For outdoor application a drip shield and drain vent is recommended.
Options
Options
SCE-30EL2412SS6LP Saginaw Control & Engineering 30 x 24 x 12 S.S. EL Enclosure
Optional mounting feet available.
Door hardware available.
Finish
Finish
SCE-30EL2412SS6LP Saginaw Control & Engineering 30 x 24 x 12 S.S. EL Enclosure
#4 brushed finish on all exterior surfaces. Optional sub-panels are powder coated white.
Industry Standards
Industry Standards
SCE-30EL2412SS6LP Saginaw Control & Engineering 30 x 24 x 12 S.S. EL Enclosure
- NEMA Type 3R, 4, 4X, 12 and Type 13
- UL Listed Type 3R, 4, 4X and 12
- CSA Type 4, 4X and 12
- IEC 60529
- IP 66
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |