- SKU:
- SCE-2PBX-RAL1018
- Weight:
- 3.00 LBS
- Width:
- 4.00 in
- Height:
- 6.00 in
- Depth:
- 4.75 in
- Dimensions:
- 6in x 4in x 4.75in
Representative image shown
SCE-2PBX-RAL1018
PBX Enclosure
$83.24
Factory New
Saginaw Control & Engineering
Representative image shown
Versions (6)
Product Details
Complete Your Build
verified
Verified fit
These products are compatible with the
Plugs
Build My Enclosure
Total price: $0
Construction
Construction
- 0.063 In. carbon steel.
- Continuously welded seams.
- Captivated cover screws thread into sealed wells.
- 4-way standard pushbutton holes accept all brands of oil-tight pushbuttons, switches, and pilot lights. Hole diameter is 1.20 In. (30.5mm).
- Pour in place oil & water resistant gasket
- Welded mounting provision top and bottom of back.
Application
Application
Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil.
Finish
Finish
RAL 1018 Yellow powder coat inside and out.
Industry Standards
Industry Standards
- NEMA Type 4, 12 and Type 13
- UL Listed Type 4 and 12
- CSA Type 4 and 12
- IEC 60529
- IP 66
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |