- SKU:
- SCE-24XEL2510LPLG
- Weight:
- 59.00 LBS
- Width:
- 25.38 in
- Height:
- 24.00 in
- Depth:
- 10.00 in
- Dimensions:
- 24in x 25.38in x 10in
- Material:
- Carbon Steel
- Enclosure Type:
- Wall Mounted
- Closure Type:
- 2-Point Padlocking Handle
Representative image shown
SCE-24XEL2510LPLG
Carbon Steel Disconnect Enclosure with Hinged Cover and 2-Point Latching Mechanism
$460.14
Factory New
Saginaw Control & Engineering
Saginaw Control and Engineering, XEL LP Enclosure, 0.075 In. carbon steel, Removable and interchangeable door, 2-point latching mechanism, NEMA Type 3R, 4, 12 and Type 13
Representative image shown
Versions (10)
Product Details
Complete Your Build
verified
Verified fit
These products are compatible with the
Ventilation
Inner Panels
Mounting
Drip Shields
Panels
Build My Enclosure
Total price: $0
Construction
Construction
- 0.075 In. carbon steel.
- Seams continuously welded and ground smooth.
- Flange trough collar around all sides of door opening.
- Pour in place oil & water resistant gasket
- Collar studs 3/8-16 provided for mounting optional panels.
- Disconnect cutout provided on flange.
- Concealed hinges.
- Doors are interchangeable and easily removed by pulling hinge pins.
- 3-point latching mechanism when door height is greater or equal to 40 inches, 2-point latching mechanism when door height is less than 40 inches.
- Latches are opened or closed with a screwdriver (optional tamper-resistant inserts are available).
- Mounting holes on back of enclosure.
- Mounting hardware, sealing washer and hole plug included.
- Ground studs on door and body.
- Black zinc die cast coinproof/padlocking handle.
- Removable print pocket.
Application
Application
Designed to house electrical and electronic controls, instruments and components. Provides protection from dust, oil and water. Designed to house most standard type disconnects. For outdoor application a drip shield and drain vent is recommended.
Finish
Finish
RAL 7035 gray powder coating inside and out. Optional sub-panels are powder coated white.
Industry Standards
Industry Standards
- NEMA Type 3R, 4, 12 and Type 13
- UL Listed Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- IEC 60529
- IP 66
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |