NEMA Rating
Construction
SCE-24H2406SSLP Saginaw Control & Engineering 24 x 24 x 6 Nema 4X LP Enclosure
- 0.075 In. stainless steel Type 304.
- Continuously welded seams ground smooth.
- Flange trough collar around all sides of door opening.
- Oil-resistant door gasket.
- Collar studs provided for mounting optional subpanels.
- Hasp and staple for padlocking.
- Stainless steel continuous hinge.
- Removable print pocket furnished if height and width of enclosure is greater than 12 Inches.
- Ground stud on door.
- Stainless steel clamps on three sides door when greater than 30 inch wide.
- Mounting provision top and bottom of back.
Application
SCE-24H2406SSLP Saginaw Control & Engineering 24 x 24 x 6 Nema 4X LP Enclosure
Designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are very wet conditions. Provides protection from dust, dirt, oil and water. For outdoor applicationS a drip shield is recommended. For outdoor application a drip shield and drain vent is recommended.
Finish
SCE-24H2406SSLP Saginaw Control & Engineering 24 x 24 x 6 Nema 4X LP Enclosure
#4 brushed finish on all exterior surfaces. Optional sub-panels are powder coated white.
Industry Standards
SCE-24H2406SSLP Saginaw Control & Engineering 24 x 24 x 6 Nema 4X LP Enclosure
- NEMA Type 3R, 4, 4X, 12 and Type 13
- UL Listed Type 3R, 4, 4X and 12
- CSA Type 4, 4X and 12
- IEC 60529
- IP 66
Related Products
