Construction
Construction
SCE-20206ELJ Saginaw Control & Engineering 20 x 20 x 6 ELJ Enclosure
- 0.063 In. carbon steel.
- Seams continuously welded and ground smooth.
- Flange trough collar around all sides of door opening.
- Pour in place oil & water resistant gasket.
- 10-32 Standoffs provided for mounting optional panels.
- Removable hinges.
- Doors open 180 degrees.
- Black mini quarter turn latches.
- Latches are opened or closed with a screwdriver.
- Sealing washers and hole plugs included.
- Ground stud on door & body.
- Mounting feet included.
Application
Application
SCE-20206ELJ Saginaw Control & Engineering 20 x 20 x 6 ELJ Enclosure
Designed to house electrical controls, instruments and components in areas which may be regularly hosed down or are in very wet or oily conditions. Provides protection from dust, dirt, oil, and water. For outdoor application a drip shield and drain vent is recommended.
Finish
Finish
SCE-20206ELJ Saginaw Control & Engineering 20 x 20 x 6 ELJ Enclosure
ANSI-61 gray powder coating inside and out. Optional sub-panels are powder coated white.
Industry Standards
Industry Standards
SCE-20206ELJ Saginaw Control & Engineering 20 x 20 x 6 ELJ Enclosure
- NEMA Type 3R, 4, 12 and Type 13
- UL Listed Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- IEC 60529
- IP 66
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |