SCE-12PBH

Hinged PB Enclosure
Representative image shown

$167.68
SKU:
SCE-12PBH
Weight:
16.16 LBS
Dimensions:
12.125in x 10in x 6in

NEMA Rating

  • N1
    Indoor
    Protection from fingers, tools and small objects
  • N12
    Indoor
    Protection from dust and light splashes of water
  • N3R
    Outdoor
    Protection from rain, snow and sleet
  • N4
    Outdoor
    Protection from rain, snow, sleet, and hose directed water
  • N4X
    Outdoor
    Protected from rain, snow, sleet, and pressure rated hose directed water from all angles

Construction

SCE-12PBH Saginaw Control & Engineering 12.125 x 10 x 6 Hinged PB Enclosure

  • 0.063 In. carbon steel.
  • Continuously welded seams.
  • Captivated cover screws thread into sealed wells.
  • 4-way standard pushbutton holes accept all brands of oil-tight pushbuttons, switches, and pilot lights. Hole diameter is 1.20 In. (30.5 mm)
  • Bolt-on continuous hinge with stainless steel hinge pin.
  • Provisions for removable subpanel, supported by standoffs.
  • Ground stud on door.
  • Pour in place oil & water resistant gasket
  • Welded mounting provision top and bottom of back.

Application

SCE-12PBH Saginaw Control & Engineering 12.125 x 10 x 6 Hinged PB Enclosure

Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil.

Finish

SCE-12PBH Saginaw Control & Engineering 12.125 x 10 x 6 Hinged PB Enclosure

ANSI-61 gray powder coating inside and out. Optional sub-panels are powder coated white.

Industry Standards

SCE-12PBH Saginaw Control & Engineering 12.125 x 10 x 6 Hinged PB Enclosure

  • NEMA Type 4, 12 and Type 13
  • UL Listed Type 4 and 12
  • CSA Type 4 and 12
  • IEC 60529
  • IP 66

Related Products