PCJ14126CCNLF

• Designed to insulate and protect controls and components in both indoor and outdoor conditions
• Ideal for industrial pump controls, waste water, irrigation control along with solar/wind and chemical plants

• UL 508A Type 1, 2, 3, 3R, 4, 4X, 12 and 13
• CSA Type 1, 2, 3, 3R, 4, 4X, 12 and 13
• Complies with
  • NEMA Type 1, 2, 3, 3R, 4, 4X, 12 and 13
  • IEC 60529, IP66 
  • Flammability V-O per UL 94
  • UV rating (f1) per UL746C - UV stabilized for outdoor use
  • Compliant with RoHS directive

• Injection moulded polycarbonate thermoplastic  enclosure with matching cover is easily punched, cut, or drilled
• Enhanced UV inhibitors protect against outdoor weathering
• Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included
• Stainless steel 316 screw  fasteners
• Door fasteners include a provision for padlocking  on Snap Latches
• Enclosure available with clear Polycarbonate cover
• Molded hinge
• Captive oil resistant gasket provides a positive seal
• Available with Polycarbonate flange or foot mount brackets for multi-directional mounting
• Operating temperatures between 130°C and - 35 °C (266°F to - 31 °F)
• Impact index of  16 J (12 ft/lb)
• For corrosion resistance information, please refer to table in the Technical Information section

• Polycarbonate material has a light gray finish
• Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or fiberglass

Enclosure Type	JIC Size
Cover Type	Clear Polycarbonate
Closure Type	Nonmetal Snap Latch
Mounting Description	Nonmetal flange fastened to back side brass inserts
Height	13.85 in (351.79 mm)
Width	12.07 in (306.578 mm)
Depth	5.94 in (150.876 mm)
Usable Depth	5.99 in (152.146 mm)
Volume	1161 cu. in. (19025423.1 cu mm)
Color	Gray (RAL 7035) with clear cover
Material	Polycarbonate box and clear polycarbonate cover
Additional Materials	316 stainless steel external hardware (hinges/latches/fasteners), Polycarbonate mounting brackets, Plated carbon steel internal hardware, Brass inserts, Polyurethane (FIP) Formed-In-Place gasket system

All products manufactured by Hammond are warrant to be free from defects in materials and workmanship for a period of one (1) year from date of shipment from its plant. If within such period any such goods shall be proven to Hammond’s satisfaction to be defective, such goods shall be repaired or replaced at Hammond’s option. Such corrections or replacement of defective goods shall constitute a fulfillment of all liabilities in respect to such goods. Under no circumstances will credit be allowed for unauthorized rework on any materials. Please contact your local Hammond Representative for warranty information pertaining to any Hammond offered product not manufactured by Hammond. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hammond shall not be liable for damages to goods, property, or persons due to improper installation or through attempts to utilize the goods under conditions which exceed the designed capabilities.