N1A24209

Designed for indoor use to house controls, instruments and components not requiring oil-tight or dust-tight protection.

• UL 50 Type 1
• CSA Type 1
• Complies with
  • NEMA Type 1
  • IEC 60529, IP20

• Enclosure is formed and spot welded from 12 or 14 gauge steel.
• Removable 12 or 14 gauge inner panel is mounted in the rear of the enclosure on collar studs.
• Removable door is mounted on slip hinges.
• Door is fastened with a slotted quarter turn latch; doors 30” and higher are provided with two latches.
• A bonding stud is provided on the door and a grounding stud is provided in the box.
• Mounting holes are provided in the rear of the enclosure.
• Piano hinge on 12 gauge units.

• Enclosure and door are finished in ANSI 61 gray powder coating.
• Inner panel is finished in white powder coating.

All products manufactured by Hammond are warrant to be free from defects in materials and workmanship for a period of one (1) year from date of shipment from its plant. If within such period any such goods shall be proven to Hammond’s satisfaction to be defective, such goods shall be repaired or replaced at Hammond’s option. Such corrections or replacement of defective goods shall constitute a fulfillment of all liabilities in respect to such goods. Under no circumstances will credit be allowed for unauthorized rework on any materials. Please contact your local Hammond Representative for warranty information pertaining to any Hammond offered product not manufactured by Hammond. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hammond shall not be liable for damages to goods, property, or persons due to improper installation or through attempts to utilize the goods under conditions which exceed the designed capabilities.