DTS3285A230N4SS

• Designed for side mounting on any enclosure surface where high capacity system cooling is required.
• Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
• Optimum air circulation with maximum clearance distance between warm inlet and cold outlet for reduced hot spot locations.
• Condensor with 3 mm fin spacing, highly effective protection against strongly contaminated and aggressive ambient air.

• R134a refrigerant.
• Thermostat control accessible from inside enclosure.
• Hot gas bypass valve prevents evaporator freeze up while minimizing heavy inrush currents on large BTU/H units.
• Built in condensate evaporator.
• Continuous air circulation from high capacity fans.
• EMI/RFI suppression meets CE.
• Self-diagnostics on startup.
• Fault indication via LED light.
• Provision for door contact allowing power down when enclosure door is opened.
• Gasket, mounting kit and template for enclosure cutout and drilling are included.
• Condensate drain hose and clamp provided.

• UL, cUL, and CE
• Complies with
  • IP56
  • NEMA 3R, 4, 4X

Manufacturer Warranty: All products manufactured by Hammond are warrant to be free from defects in materials and workmanship for a period of one (1) year from date of shipment from its plant. If within such period any such goods shall be proven to Hammond’s satisfaction to be defective, such goods shall be repaired or replaced at Hammond’s option. Such corrections or replacement of defective goods shall constitute a fulfillment of all liabilities in respect to such goods. Under no circumstances will credit be allowed for unauthorized rework on any materials. Please contact your local Hammond Representative for warranty information pertaining to any Hammond offered product not manufactured by Hammond. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hammond shall not be liable for damages to goods, property, or persons due to improper installation or through attempts to utilize the goods under conditions which exceed the designed capabilities.