Polycarbonate enclosure with hinged cover and snap latch

Product Condition: New
5.00 LBS
10in x 8in x 6in
Enclosure Type:
Wall Mounted
Cover Type:
Closure Type:
Metal Snap Latch
Mounting Type:
Nonmetal Feet

NEMA Rating

  • N1
    Protection from fingers, tools and small objects
  • N12
    Protection from dust and light splashes of water
  • N3R
    Protection from rain, snow and sleet
  • N4
    Protection from rain, snow, sleet, and hose directed water
  • N4X
    Protected from rain, snow, sleet, and pressure rated hose directed water from all angles


Non-corrosive, non-conductive, light weight with lower installation cost, easy to modify and longer life cycle compared to steel. Rigid design with back panel inserts plus nonmetallic mounting brackets and a gasket system encased in a continuous channel on the cover.


Enclose and protect electrical and electronic controls, instruments or components for indoor and outdoor applications. Especially well suited for extreme temperature and corrosive environments.


  • UL 508A, UL 50 and UL 50E Types 1, 2, 3, 3R, 4, 4X, 12 and 13
  • CSA C22.2 No. 94 Types 1, 2, 3, 3R, 4, 4X, 12 and 13
  • Complies with:
    1. EN / IEC 60204-1 and 60529 Type IP66
    2. RoHS directive


Enclosure Type JIC Size
Cover Type Opaque
Closure Type Metal Snap Latch
Mounting Description Nonmetal feet fastened to back side brass inserts
Height 9.9 in (251.46 mm)
Width 8.12 in (206.248 mm)
Depth 5.94 in (150.876 mm)
Usable Depth 6.06 in (153.924 mm)
Volume 500 cu. in. (8193550 cu mm)
Color Gray (RAL 7035)
Material Polycarbonate box and cover
Additional Materials 316 stainless steel external hardware (hinges/latches/fasteners), Polycarbonate mounting brackets, Plated carbon steel internal hardware, Brass inserts, Polyurethane (FIP) Formed-In-Place gasket system

Warranty Information

One Year “Bumper to Bumper” Warranty – Allied Moulded Products, Inc. warrants its Industrial Electrical Enclosures to be substantially free from defects in materials and workmanship when used in applications considered normal use for one year from the date of original shipment from our factory (or warehouse) or one year from documented field installation, not to exceed 24 months from the original shipment date from Allied Moulded. This “Bumper to Bumper” warranty covers the standard color fiberglass enclosure as well as hardware, modifications, and accessories supplied by Allied Moulded as part of the original enclosure. This warranty expressly does not cover damage related to after-market or field modifications, repairs, misuse, handling, neglect, accident, improper storage, shipping damage, installation, or assembly damage. Any enclosure deemed defective during the warranty period will be either repaired or replaced at Allied Moulded’s sole option. Repair or replacement of the enclosure in question along with any pre-approved, reasonable labor costs will constitute complete fulfillment of Allied Moulded’s liabilities.

Related Products

AMP1086CCL | Allied Moulded Products 10 x 8 x 6 Polycarbonate enclosure with hinged clear cover and snap latch


Polycarbonate enclosure with hinged clear cover and snap latch
10in x 8in x 6in