Features
Features
Non-corrosive, non-conductive, light weight with lower installation cost and longer life cycle cost compared to steel. Rigid design with a gasket system encased in a continuous channel on the cover and frame. Open back frame design with an opening size of 12.49″ x 10.71″ and is a UL recognized component for use with NEMA 4X enclosures. Will fit Allied Moulded enclosure sizes 16" x 14" and larger.
Application
Application
Cover and protect electrical and electronic controls including HMI (Human Machine Interface) instruments, touch pad controllers and pushbuttons mounted on the surface of NEMA 4X enclosures. No need to open the enclosure to view electronics or perform maintenance, decreasing arc flash risks and safety hazards.
Standards
Standards
- Meets Requirements: ANSI/UL50, ANSI/UL50E, and ANSI/UL508A
- UL® listed and recognized component for use with enclosure products Types 1, 2, 3, 3R, 4, 4X, 12 and 13.
- Complies With:
- EN / IEC 60204-1 and 60529 Type IP66
- RoHS directive
Specifications
Specifications
| Cover Type | Clear Polycarbonate |
|---|---|
| Closure Type | 2-Screw |
| Mounting Description | 10 Screws |
| Height | 13.95 in (354.33 mm) |
| Width | 12.07 in (306.578 mm) |
| Depth | 0.96 in (24.384 mm) |
| Usable Depth | 2.2 in (55.88 mm) |
| Volume | 370 cu. in. (6063227 cu mm) |
| Color | Gray (RAL 7035) with clear cover |
| Material | Polycarbonate frame and clear polycarbonate cover |
| Additional Materials | 316 stainless steel external hardware, Polyurethane (FIP) Formed-In-Place gasket system |
Documents for
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |
Related Products
Warranty Information
One Year “Bumper to Bumper” Warranty – Allied Moulded Products, Inc. warrants its Industrial Electrical Enclosures to be substantially free from defects in materials and workmanship when used in applications considered normal use for one year from the date of original shipment from our factory (or warehouse) or one year from documented field installation, not to exceed 24 months from the original shipment date from Allied Moulded. This “Bumper to Bumper” warranty covers the standard color fiberglass enclosure as well as hardware, modifications, and accessories supplied by Allied Moulded as part of the original enclosure.
This warranty expressly does not cover damage related to after-market or field modifications, repairs, misuse, handling, neglect, accident, improper storage, shipping damage, installation, or assembly damage.
Any enclosure deemed defective during the warranty period will be either repaired or replaced at Allied Moulded’s sole option. Repair or replacement of the enclosure in question along with any pre-approved, reasonable labor costs will constitute complete fulfillment of Allied Moulded’s liabilities.