Features - Allied Moulded Products AM30240RL
Features - Allied Moulded Products AM30240RL
Non-corrosive, non-conductive, light weight with lower installation cost, easy to modify and longer life cycle compared to steel. Rigid design with back panel inserts plus stainless steel mounting brackets and a gasket system encased in a continuous channel on the cover.
Application - Allied Moulded Products AM30240RL
Application - Allied Moulded Products AM30240RL
Enclose and protect electrical and electronic controls, instruments or components for indoor and outdoor applications. Especially well suited for extreme temperature and corrosive environments.
Standards - Allied Moulded Products AM30240RL
Standards - Allied Moulded Products AM30240RL
- UL 508A, UL 50 and UL 50E Types 1, 2, 3, 3R, 4, 4X, 12 and 13
- CSA-C22.2 No. 14 and CSA C22.2 No. 94 Types 1, 2, 3, 3R, 4, 4X, 12 and 13
- Complies with:
- EN / IEC 60204-1 and 60529 Type IP66
- RoHS directive
Specifications - Allied Moulded Products AM30240RL
Specifications - Allied Moulded Products AM30240RL
| Enclosure Type | Wall Cabinets |
|---|---|
| Cover Type | Opaque |
| Closure Type | Metal Snap Latch |
| Mounting Description | Stainless steel feet fastened to back side brass inserts |
| Height | 30 in (762 mm) |
| Width | 24 in (609.6 mm) |
| Depth | 10 in (254 mm) |
| Usable Depth | 10.65 in (270.51 mm) |
| Volume | 8554 cu. in. (140175253.4 cu mm) |
| Color | Gray (RAL 7035) |
| Material | ULTRAGUARD® Fiberglass reinforced polyester - compression molded SMC box and Cover |
| Additional Materials | 316 stainless steel external hardware (hinges/latches/fasteners), 316 stainless steel mounting brackets, Plated carbon steel internal hardware, Brass inserts, Polyurethane (FIP) Formed-In-Place gasket system |
Documents for
NEMA Rating for
+
| Environments | Type 1 | Type 12 | Type 3R | Type 4 | Type 4X |
|---|---|---|---|---|---|
| Indoor use only | |||||
| Indoor and outdoor use | |||||
| Falling liquids and light splashes | |||||
| Nonhazardous dust, lint, and fibers | |||||
| Washdowns and splashing water | |||||
| Oil and coolant seepage | |||||
| Corrosive agents | |||||
|
Hazardous locations (Class I, Division 1 and 2) |
Related Products
Warranty Information
Manufacturer Warranty: One Year Bumper to Bumper Warranty, Allied Moulded Products, Inc. warrants its Industrial Electrical Enclosures to be substantially free from defects in materials and workmanship when used in applications considered normal use for one year from the date of original shipment from our factory (or warehouse) or one year from documented field installation, not to exceed 24 months from the original shipment date from Allied Moulded. This “Bumper to Bumper” warranty covers the standard color fiberglass enclosure as well as hardware, modifications, and accessories supplied by Allied Moulded as part of the original enclosure.
This warranty expressly does not cover damage related to after-market or field modifications, repairs, misuse, handling, neglect, accident, improper storage, shipping damage, installation, or assembly damage.
Any enclosure deemed defective during the warranty period will be either repaired or replaced at Allied Moulded’s sole option. Repair or replacement of the enclosure in question along with any pre-approved, reasonable labor costs will constitute complete fulfillment of Allied Moulded’s liabilities.