1488HH9

• Designed for use as electric, hydraulic or pneumatic control and instrument enclosures.
• Ideal for flat or surface mounting/pedestal to provide the necessary 30° or 60° control slope.
• Provides protection from dirt, dust, oil and water.

• UL 508A Type 12, 13
• CSA Type 12, 13
• Complies with
  • NEMA Type 12, 13
  • IEC 60529, IP54

• Formed 14 gauge steel.
• Smooth, continuously welded seams.
• Construction provides either 30° or 60° slope on front cover depending on mounting position.
• Continuously hinged cover may be removed by pulling the hinge pin.
• Captive cover screws thread into sealed wells.
• Oil resistant gasket and adhesive.
• A bonding stud is provided on the door and a ground stud is provided on the enclosure.

• Cover and enclosure are phosphatized and finished in ANSI 61 gray powder coating.

All products manufactured by Hammond are warrant to be free from defects in materials and workmanship for a period of one (1) year from date of shipment from its plant. If within such period any such goods shall be proven to Hammond’s satisfaction to be defective, such goods shall be repaired or replaced at Hammond’s option. Such corrections or replacement of defective goods shall constitute a fulfillment of all liabilities in respect to such goods. Under no circumstances will credit be allowed for unauthorized rework on any materials. Please contact your local Hammond Representative for warranty information pertaining to any Hammond offered product not manufactured by Hammond. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hammond shall not be liable for damages to goods, property, or persons due to improper installation or through attempts to utilize the goods under conditions which exceed the designed capabilities.