Mild steel enclosure with continuous hinge door and clamps (w/ panel)
Representative Image Shown

Product Condition: New
15.00 LBS
10.00 in
12.00 in
5.00 in
12in x 10in x 5in
Enclosure Type:
Wall Mounted
Cover Type:
Closure Type:
Stainless Steel Clamps
Mounting Type:
Metal Feet

NEMA Rating

  • N1
    Protection from fingers, tools and small objects
  • N12
    Protection from dust and light splashes of water
  • N3R
    Protection from rain, snow and sleet
  • N4
    Protection from rain, snow, sleet, and hose directed water
  • N4X
    Protected from rain, snow, sleet, and pressure rated hose directed water from all angles


  • Designed for use as instrument enclosures, electric, hydraulic or pneu­­matic control housings, electrical junction boxes or terminal wiring enclosures.
  • Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.


  • UL 508A Type 3R, 4, 12 and 13
  • CSA Type 3R, 4, 12 and 13
  • Complies with
    • NEMA Type 3R, 4, 12 and 13
    • IEC 60529, IP66


  • Body formed from 16 or 14 gauge steel. Covers are formed from 14 gauge steel.
  • Smooth, continuously welded seams without knockouts, cutouts or holes.
  • Welded brackets provide for enclosure mounting.
  • Continuous hinged cover is secured with stainless steel clamps and screws.
  • Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin.
  • Seamless poured-in place gasket.
  • All models larger than 4" x 4" include a removable 14 gauge inner panel.
  • Internal threaded weld studs are provided for mounting inner panels.
  • A bonding stud is provided on the door and a grounding stud is provided in the enclosure.


  • Cover and enclosure are phos­phatized, finished in recoatable smooth ANSI 61 gray powder coating.
  • Removable inner panel is finished in white powder coating.

Warranty Information

All products manufactured by Hammond are warrant to be free from defects in materials and workmanship for a period of one (1) year from date of shipment from its plant. If within such period any such goods shall be proven to Hammond’s satisfaction to be defective, such goods shall be repaired or replaced at Hammond’s option. Such corrections or replacement of defective goods shall constitute a fulfillment of all liabilities in respect to such goods. Under no circumstances will credit be allowed for unauthorized rework on any materials. Please contact your local Hammond Representative for warranty information pertaining to any Hammond offered product not manufactured by Hammond. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hammond shall not be liable for damages to goods, property, or persons due to improper installation or through attempts to utilize the goods under conditions which exceed the designed capabilities.

Related Products

1418N4P12 | Hammond Manufacturing 42 x 36 x 12 Mild steel enclosure with continuous hinge door and clamps (w/ panel)


Mild steel enclosure with continuous hinge door and clamps (w/ panel)
42in x 36in x 12in
1418N4D8 | Hammond Manufacturing 20 x 20 x 8 Mild steel enclosure with continuous hinge door and clamps (w/ panel)


Mild steel enclosure with continuous hinge door and clamps (w/ panel)
20in x 20in x 8in
1414PHK | Hammond Manufacturing 12 x 10 x 5 Steel Enclosure with Continuous Hinge Door and Clamps


Steel junction box with continuous hinge and clamps
12in x 10in x 5in