XT2SU3030AFF000XXX ABB Molded Case Circuit Breaker (3P, 30-400A, 600V)
Break new ground simply means delivering value through the entire customer journey by leaving behind the traditional concept of circuit-breaker. The SACE Tmax XT range offers a unique customer experience that, sharing the same features and logics with the Emax 2 range, for the first time ever overcomes the differences between molded case and air circuit-breakers. The most advanced products designed to maximize data and connectivity, ease of use and installation, performance and protection, safety and reliability. The SACE Tmax XT range offers higher performance, better protection and more precise metering than equivalent units, and can handle from 160 up to 1600A. Combined with the world’s most precise electronic trip units in the smallest frames, the new range delivers significant time savings and enhances installation quality. Reliability is further increased, and speed of installation reduced, thanks to Bluetooth and Ekip connectivity for mobile devices.
Features
XT2SU3030AFF000XXX ABB Molded Case Circuit Breaker (3P, 30-400A, 600V)
Ease of Use and Installation
Maximum flexibility for every application – SACE Tmax XT sets standards for electrical installations. Easy selection, one-fits-all accessories and intuitive design pave the way for fast upgrades and create values through the entire customer journey. Even for the most critical projects
Ease of Selection
The clever organization of the SACE Tmax XT range and the user-friendly software e-Configure allows the customer to easily select and customize the right products for their needs.
One-Fits-All Accessories
Improving the circuit-breaker from its basic functions to a more versatile and sophisticated device is made possible thanks to the SACE Tmax XT modular structure and the variety of available accessories.
Upgradability
The Ekip Touch and Hi-Touch trip units can always be upgraded via ABB Ability MarketplaceTM and new functionalities shall be always available for an ever ending future.
Electrical Performances
SACE Tmax XT is designed and tested to meet any installation requirement, even the most critical ones.
Metering
SACE Tmax XT provides all the tools needed to set up a competent and effective energy management strategy thanks to the trip units able to measure electrical parameters with 1% accuracy certification.
Protections and Logics
SACE Tmax XT integrates extra functionalities into the size of a standard molded case circuit-breaker. The most advanced protection functions and logics are available thanks to its cutting-edge trip units.
Safety and Reliability
Absolute attention to detail, with style from design to manufacturing SACE Tmax XT sets standards for edge technologies. Half a century of research and experience means top-level products that are ready to face future challenges.
Construction Characteristics
XT2SU3030AFF000XXX ABB Molded Case Circuit Breaker (3P, 30-400A, 600V)
Double insulation
The XT2SU3030AFF000XXX circuit-breaker has double insulation between the live power parts (excluding the terminals) and the front parts of the apparatus where the operator works during normal operation. The seat of each electrical accessory is completely segregated from the power circuit, preventing any risk of contact with live parts. The operating mechanism especially is completely insulated from the powered circuits. Furthermore, the XT2SU3030AFF000XXX circuit-breaker has oversized insulation, both between the live internal parts and near the connection terminals. Furthermore, the distances exceed those required by the IEC Standards and fully comply with the prescriptions of the UL 489 Standard.
Insulation Behavior
In the open position, the circuit-breaker guarantees insulation distances in compliance with the IEC 60947-2 Standard, thus preventing leakage currents to flow between the input and output terminals.
Positive Operation
The operating lever always indicates the precise position of the moving contacts of the circuit-breaker, thereby guaranteeing safe and reliable signals, in compliance with IEC 60073 and IEC 60417-2 Standards (I = Closed; O = Open; yellow-green line = open due to protection trip). The circuit-breaker operating mechanism has a free release regardless of the pressure on the lever and the speed of operation. Protection tripping automatically opens the moving contacts: to close them again, the operating mechanism must first be reset by pushing the operating lever from the intermediate position to the lowest open position.
Tropicalization
Circuit-breakers and accessories in the Tmax XT series are tested in compliance with the IEC 60068-2-30 Standard, carrying out 2 cycles at 55 °C with the “variant 1” method (clause 7.3.3). The suitability of the Tmax XT series under the most severe environmental conditions is further ensured with the hot-humid climate according to climatograph 8 in the IEC 60721-2-1 Standards thanks to:
- molded insulating cases made of synthetic resins reinforced with glass fibers
- anti-corrosion treatment of the main metallic parts
- Fe/Zn 12 zinc-plating (ISO 2081) protected by a conversion layer, free from hexavalent chromium (ROHS-compliant), with the same corrosion resistance guaranteed by ISO 4520 class 2C
- application of anti-condensation protection for electronic overcurrent releases and relative accessories.
Compliance with Standards
XT2SU3030AFF000XXX ABB Molded Case Circuit Breaker (3P, 30-400A, 600V)
Tmax XT circuit-breakers and their accessories are constructed in compliance with:
- Standard:
- IEC 60947-2
- Directives:
- EC “Low Voltage Directive” (LVD) N° 2014/35/EC
- EC “Electromagnetic Compatibility Directive” (EMC) 2014/30/EC
- Shipping Registers
- Lloyd’s Register of Shipping, Germanischer Lloyd, Bureau Veritas, Rina, Det Norske Veritas, Russian Maritime Register of Shipping, ABS
Certification of conformity with product Standards is carried out at the ABB SACE test laboratory (accredited by ACCREDIA - certificate no. 0062L-D2/2020) in compliance with UNI CEI EN IS0/IEC 17025 European Standard, by the Italian certification body ACAE, member of the European LOVAG organization and by the Swedish certification body SEMKO recognized by the international IECEE organization.
Specifications
XT2SU3030AFF000XXX ABB Molded Case Circuit Breaker (3P, 30-400A, 600V)
EAN | 8015644787417 |
---|---|
Product Net Width | 90 mm |
Product Net Height | 130 mm |
Product Net Depth/Length | 82.5 mm |
Product Net Weight | 1.4 kg |
Interrupting Rating acc. to UL489 | (240 V AC) 100 kA (480 V AC) 35 kA (600 V AC) 22 kA (250 V DC) 2 Poles in Series 50 kA (500 V DC) 3 Poles in Series 50 kA |
Circuit Breaker Type to be Associated | Power Distribution |
Current Type | AC/DC |
Electrical Durability | 120 cycles per hour 8000 cycle |
Mechanical Durability | 240 cycles per hour 25000 cycle |
Number of Poles | 3 |
Opening Time | CB with SOR 15 ms CB with UVR 15 ms |
Power Loss | at Rated Operating Conditions per Pole 2.3 W |
Product Main Type | SACE Tmax XT |
Product Name | Moulded Case Circuit Breaker |
Product Type | CB |
Rated Current (In) | 30 A |
Rated Voltage (Ur) | 600 V |
Rated Instantaneous Short-Circuit Current Setting (Ii) | 400 A |
Rated Operational Voltage | 600 V AC 500 V DC |
Rated Uninterrupted Current (Iu) | 125 A |
Release | TMF |
Release Type | TM |
Setting Range | 30 A |
Short-Circuit Performance Level | S |
Standards | UL |
Sub-type | XT2 |
Suitable for Product Class | SACE Tmax XT |
Terminal Connection Type | Fixed Circuit-Breakers |
Version | F |