Specifications
Specifications
| Product Name |
Eaton DC1 Variable frequency drive
|
|---|---|
| Catalog Number |
185824
|
| Product Length/Depth |
124 mm
|
| Product Height |
184 mm
|
| Product Width |
81 mm
|
| Product Weight |
1.2 kg
|
| Certifications |
EAC
UL 508C UkrSEPRO UL Category Control No.: NMMS, NMMS7 UL RCM UL File No.: E172143 CE CSA-C22.2 No. 14 Specification for general requirements: IEC/EN 61800-2 UL report applies to both US and Canada IEC/EN61800-5 Safety requirements: IEC/EN 61800-5-1 Certified by UL for use in Canada IEC/EN61800-3 CUL RoHS, ISO 9001 IEC/EN 61800-3 |
| Catalog Notes |
Environmental class: 3C2, 3S2
Overload cycle for 60 s every 600 s |
| EAN |
4015081813230
|
| Model Code |
DC1-327D0NN-A20CE1
|
| Apparent power at 230 V |
2.79 kVA
|
| Apparent power at 240 V |
2.91 kVA
|
| Braking torque |
Max. 100 % of rated operational current Ie, variable, DC - Main circuit
Max. 30 % MN, Standard - Main circuit |
| Altitude |
Above 1000 m with 1 % derating per 100 m
Max. 4000 m |
| Ambient operating temperature - max |
50 °C
|
| Ambient storage temperature - max |
60 °C
|
| Ambient operating temperature - min |
-10 °C
|
| Ambient operating temperature at 150% overload - max |
50 °C
|
| Ambient operating temperature at 150% overload - min |
-10 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Climatic proofing |
< 95 average relative humidity (RH), no condensation, no corrosion
|
| Number of inputs (analog) |
2 (parameterizable, 0 - 10 V DC, 0/4 - 20 mA)
|
| Number of inputs (digital) |
4 (parameterizable, 10 - 30 V DC)
|
| Number of outputs (analog) |
1
|
| Number of outputs (digital) |
1
|
| Number of relay outputs |
1 (parameterizable, N/O, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| Equipment heat dissipation, current-dependent Pvid |
61.5 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Rated operational current for specified heat dissipation (In) |
7 A
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| Features |
Parameterization: drivesConnect
Parameterization: drivesConnect mobile (App) Parameterization: Fieldbus Parameterization: Keypad |
| Fitted with | Internal DC link IGBT inverter Control unit 7-digital display assembly PC connection Additional PCB protection |
| Cable length | 100 m, screened, with motor choke, maximum permissible, Motor feeder 150 m, unscreened, with motor choke, maximum permissible, Motor feeder 75 m, unscreened, maximum permissible, Motor feeder 50 m, screened, maximum permissible, Motor feeder |
| Communication interface | SmartWire-DT, optional OP-Bus (RS485), built in CANopen®, built in Modbus RTU, built in |
| Connection to SmartWire-DT | In conjunction with DX-NET-SWD3 SmartWire DT module Yes |
| Degree of protection | IP20 NEMA Other |
| Frame size | FS1 |
| Mounting position | Vertical |
| Product category | Variable frequency drives |
| Protection | Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4) |
| Protocol | EtherNet/IP CAN MODBUS Other bus systems |
| Radio interference class | Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments |
| Suitable for | Branch circuits, (UL/CSA) |
| Efficiency | 95.9 % (η) |
| Heat dissipation at current/speed | 23 W at 25% current and 0% speed 27 W at 25% current and 50% speed 29 W at 50% current and 0% speed 37 W at 50% current and 50% speed 40 W at 50% current and 90% speed 54 W at 100% current and 0% speed 61 W at 100% current and 50% speed 70 W at 100% current and 90% speed |
| Input current ILN at 150% overload | 9.5 A |
| Leakage current at ground IPE - max | 7.5 mA |
| Mains switch-on frequency | Maximum of one time every 30 seconds |
| Mains voltage - max | 240 V |
| Mains voltage - min | 200 V |
| Operating mode | U/f control Speed control with slip compensation Sensorless vector control (SLV) BLDC motors PM motors Synchronous reluctance motors |
| Output frequency - max | 500 Hz |
| Output frequency - min | 0 Hz |
| Output voltage (U2) | 240 V AC, 3-phase 230 V AC, 3-phase |
| Overload current IL at 150% overload | 10.5 A |
| Rated control supply voltage | 10 V DC (Us, max. 10 mA) |
| Rated frequency - max | 62 Hz |
| Rated frequency - min | 48 Hz |
| Rated operational current (Ie) | 7 A at 150% overload (at an operating frequency of 16 kHz and an ambient air temperature of +50 °C) |
| Rated operational voltage | 240 V AC, 3-phase 230 V AC, 3-phase |
| Resolution | 0.1 Hz (Frequency resolution, setpoint value) |
| Short-circuit protection rating | 10 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring |
| Starting current - max | 175 %, IH, max. starting current (High Overload), For 2.5 seconds every 600 seconds, Power section |
| Supply frequency | 50/60 Hz |
| Switching frequency | 8 kHz, 4 - 32 kHz adjustable (audible), fPWM, Power section, Main circuit |
| System configuration type | AC supply systems with earthed center point |
| Voltage rating - max | 240 V |
| Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload | 6.8 A |
| Assigned motor current IM at 230 V, 50 Hz, 150% overload | 6.3 A |
Related Products
Warranty Information
Manufacturer's Warranty: Eaton Selling Policy 25-000, one (1) year from the date of installation of the product or eighteen (18) months from the date of shipment of the product, whichever occurs first. Plus 5 years on capacitor cells.