TE3-92-BP

Low Voltage Solid State Starter (92A, 208-575V, 60VA)
Representative image shown

$2,253.18
$3,800.00
Product Condition: New
SKU:
TE3-92-BP
Weight:
23.00 LBS
Width:
8.17 in
Height:
14.93 in
Depth:
7.95 in
Series:
TE3
Amperage:
92 Amps
Voltage:
208 - 575 Volts
Frame Size:
2
Control Power (VA):
60 Volt Amps

Design - Toshiba TE3-92-BP

Toshiba International Corporation’s TE3 low voltage motor starter series is an advanced premium digitally programmable solid state starter. This starter’s heavy duty ratings, built-in bypass and advanced motor protection make the TE3 soft starter suitable for extremely demanding motor applications.

  • All TE3 Units Rated 500% Current for 60 Seconds
  • Removable 3.5” Color Touch Screen Rated IP66/N4X
  • 42 Smart Application Profiles – Easy Setup in One (1) Minute
  • Auto Pedestal to Control Spinning Motors
  • Built-in iERS (intelligent Energy Recovery System)
  • 65 kA Rating with Breakers
  • Advanced Motor Protection with Memory
  • Life Time Event Logging Diagnostics
  • Metering for Power, Voltage and Current

Connection and Programming Features - Toshiba TE3-92-BP

  • 120VAC Control Voltage
  • Easy User Terminal Access
  • Four (4) Programmable Digital Inputs
  • Five (5) Programmable Relay Outputs
  • Analog Output 0-10V / 4-20mA
  • Analog Input 0-10V / 4-20mA
  • RS485 – Modbus® RTU; Other Industrial Protocols Available as Option

Setup and Tuning - Toshiba TE3-92-BP

Ease of Use

The TE3 display will show all messages in full, and users also have the option to choose from a variety of languages what language their messages will display in. The TE3’s display also uses graphics and other schematic images and real-time mimic diagrams to provide a visual representation of what is happening mechanically with the TE3. Detailed life logging will aid programming of the device, and onboard USB allows configurations to be uploaded, downloaded and/or emailed.

Auto Configuration

The starter’s automatic functionality now allows for more features to be configured without needing to refer to parameter lists.

Built-In Applications

With many different applications profiles, the TE3 offers a quick and comprehensive commissioning process. Setup takes less than one (1) minute.

Automatic Load Tuning

The TE3 will dynamically tune to a changing load.

TE3 Configuration Software

The TE3’s software can be used to commission, start-up, diagnose and troubleshoot the TE3. This software has an easy-to-use interface with built-in trend recorder, monitor and status panel.

Applications - Toshiba TE3-92-BP

Pumps, Fans Blowers & Conveyors

Closed Loop Torque/Current Ramping provides a linear increase in output torque during motor acceleration and maximizes the available torque using an internal PID feedback loop to help ensure a smooth linear ramp. This smooth constant acceleration smooths out the various loads associated with these types of applications.

Compressors & Chillers

For large horsepower applications, Voltage Ramp with Current Limit provides the smoothness of voltage ramping while maintaining the ability to start in limited power environments.

Pump-Flex Decel Control - Auto Adjust 3 Points

Users are able to eliminate water hammer with the TE3’s automatic advanced Soft Stop Controls. A gradual reduction in the output torque of your pump motor results when a stop signal is initiated. Check valves close gently, and other fluid system components are no longer subjected to the shock and destructive potential of water hammer.

Auto Pedestal

The Auto Pedestal feature offers a simple economical way to deal with dynamic situations in which fans spin backward with no user input required. Auto Pedestal automatically corrects the start voltage and senses when the motor is turning in the correct direction. For dynamic situations such as roof cooling fans, which may sometimes spin backwards, resulting in belt failures, the Auto Pedestal feature will control the ramp while the motor spins down to a stop and accelerates in the correct direction. Once the soft starter senses the motor is turning in the right direction, the soft start will accelerate the motor normally.

Motor Protection, Measurement, and Analysis Functions - Toshiba TE3-92-BP

Motor Overload Protection

The TE3 protects the motor in the event of an overload condition at full I2t motor overload with the soft starter’s intelligent thermal memory retention feature, which continually monitors overloads to determine reductions in motor heating levels even when the TE3 is in the ”off” state.

Event Logging

The TE3’s data logger can record up to three million events to help enable users to conduct fast accurate fault analysis and their resolution. It allows for recording of multiple activities, including start, stop, top of ramp, faults, as well as application parameters (time, overload level, currents, frequency) and device information. Event logs can be downloaded via USB port or via the TE3 Tool (see page 6).

Soft Starter and Motor Monitoring

The TE3 continuously monitors and analyzes soft starter and motor data such as: Line Frequency, Phase Rotation, Changes to Current & Voltage (RMS), V rms, Real Power Factor, True Power P, Apparent Power S, Reactive Power Q, iERS Saving Level, SCR Overload, Delay Angle, Backstop, Delay Max, Pres PF Degrees, Ref PF Degrees, Start Saving Level, Last Peak Start Current, Last Peak Stop Current, Last Temperature, Last Overload, Heatsink Temp, Motor Thermistor Overload, Trip Free Time, Number of Starts.

Specifications - Toshiba TE3-92-BP

  • 3-Phase SCR
  • Full Motor Overload with Memory
  • Standard Trip Class 10, Class 20 & Class 30
  • 200, 208, 230, 380, 400, 460, 480, 575, or 600 Volts
  • Operates on Varying Frequency (45 Hz - 65 Hz)
  • Internal Bypass Contactor
  • Auto Pedestal Function for Spinning Motor Direction Control
  • User-Friendly, Full Color Touchscreen / Full Automatic Setup
  • 120VAC Control Voltage
  • iERS - (intelligent Energy Recovery System) as Standard
  • Multiple Languages
  • Fire Mode
  • Modbus RTU as Standard, Other Protocols Available
  • Inputs / Outputs:
    • 5 x Programmable Outputs Relays
    • 4 x Programmable Digital Inputs
    • 1 x Analog Input
    • 1 x Analog Output
    • USB for Data Logging and Parameter Setting / Saving
    • Full Meter Functions
  • Comprehensive Data Logging
  • Fully Field Upgradeable via USB Port
  • Fully Field Serviceable Fans
  • Two (2)-Year Manufacturer Warranty

Related Products