PSRC6-600-70

Soft Starter (6.8 Amps, 600V main voltage and 100-240V 50/60Hz)

$290.99
Product Condition: New
SKU:
PSRC6-600-70
UPC:
7320500465486
Weight:
0.80 LBS
Series:
PSRC
Amperage:
6.8 Amps
Voltage:
600V AC

PSRC - For Scroll Compressor

Features

  • Reduced starting current
  • Short starting time (<1s) to guarantee lubrication of the compressor
  • Recommended minimum starting voltage to secure a start in 400 V network
    • 200V for smaller compressors
    • 220V for bigger compressors
  • Two-phase controlled
  • Soft start with voltage ramp
  • Built-in bypass for energy saving and easy installation
  • Easy set-up
  • Run and Top of Ramp relays available for monitoring
  • Ambient temperature -25 to +60 degrees
  • Connection kits available for connection to ABB´s manual motor starters (MMS)

Communication

  • Fieldbus communication with fieldbus plug adapter and fieldbus plug

ABB Soft Starter Highlights

Reliability

Reduce the electrical stresses and keep the motor protected with the MMS
The PSRC reduces the starting current for the motor. The possibility to connect it
to the manual motor starter makes it possible to build a compact and complete
starting solution with overload and short-circuit protection.

Efficiency

Saving time and money with built-in bypass and easy set-up
On the PSRC, the bypass is built in and verified by ABB, saving you time during
installation and space in your panel.

Productivity

Reduce the mechanical stresses on your motor
Soft start and stop with PSRC will reduce mechanical wear and tear on the
application and increase the availability and up time.

Specifications

Dimensions

 
Product Net Width: 114 mm
Product Net Height: 140 mm
Product Net Depth / Length: 45 mm

Technical

 
Rated Operational Voltage: 208 ... 600 V AC
Rated Control Supply Voltage (Us): 100 ... 240 V AC
Rated Control Circuit Voltage (Uc): 50 Hz / 60 Hz 100 ... 240 V AC
DC Operation 24 V
Rated Frequency (f): 50/60 Hz
Main Circuit 50 / 60 Hz
Rated Operational Power - In-Line Connection (Pe): (230 V) 1.5 kW
(400 V) 3 kW
(500 V) 4 kW
Rated Operational Current - In-Line Connection (Ie): 6.8 A
Service Factor Percentage: 100 %
Overload Protection: Recommended MS116 4.00 ... 10.00
Integrated Electronic Overload: No
Starting Capacity at Maximum Rated Current Ie: 4xIe for 6s
Ramp Time: Fixed setting
Initial Voltage During Start: Fixed setting
Step Down Voltage Special Ramp: Fixed setting
Current Limit Function: No
Switch for Inside Delta Connection: No
Run Signal Relay: Yes
By-pass Signal Relay: No
Fault Signal Relay: No
Overload Signal Relay: No
Signal indication completed start ramp (LED): Green
Signal indication ready to start/standby ON (LED): Green
Signal indication running R (LED): Green
Signal indication ramping up/down (LED): Green
Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time: 10
Communication: FiledBusPlug(Optional)
Degree of Protection: IP20
Terminal Type: Screw Terminals
Connecting Capacity Main Circuit: Rigid 2 x 0.75 ... 1.5 mm²
Connecting Capacity Supply Circuit: Rigid 1 x 0.75 ... 2.5 mm²
Tightening Torque: Control Circuit 1 N·m
Main Circuit 1 N·m
Supply Circuit 1 N·m
Product Main Type: PSRC6

Related Products