Type 4X Polyester Junction Box
Lift-Off Cover/Hinged Door with Screws

Write a Review
17.00 LBS
18in x 16in x 8in
Enclosure Type:
Wall Mounted
Cover Type:
Closure Type:
Mounting Type:
Stainless Steel Feet
Designed for use as instrument enclosures, electric, hydraulic or pneu­matic control housings, electrical junction boxes or terminal wiring enclosures.Provides outstanding insulation and protection where equipment may be hosed down or be very wet.Ideal in applications with high temperatures or highly corrosive environments.


Fiberglass polyester material has a gray finish.Optional inner panels are available in white powder coated finished steel, unfinished aluminum, or Fiberglass.


Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.Enhanced UV inhibitors protect against outdoor weathering.Standard JIC sizes under 18" x 16".10-32 threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware included.Cover is fastened with captive stainless steel screws in threaded brass inserts.Captive oil resistant gasket provides a positive seal.Threaded brass inserts are provided for mounting feet to the rear of the enclosure.Stainless steel mounting brackets and hardware are provided for mounting feet to the rear of the enclosure.Operating temperatures between 130C and -40C (266F to -40F).Impact index of 6.78J (5 ft/lb).


UL 508 Type 1, 2, 3, 4, 4X, 12 and 13UL 508 Type 6P (see table)CSA Type 1, 2, 3, 4, 4X, 12 and 13CSA Type 6P (see table)Complies withNEMA Type 1, 2, 3, 4, 4X,12 and 13IEC 60529, IP66