Features
| Frame Material | Cast Iron |
|---|---|
| Impregnation Method | Dip and Bake Polyester |
| Main Terminal Box Hole | 2xM25x1,5 |
| Terminal Block | BMC - 6 pins |
| Shaft Locking Device | Without |
| Drain | Rubber, automatic |
| Shaft Material | SAE 1040/45 Carbon Steel |
| Painting | RAL 5009 207A (ISO 12944 - C3) |
| Grounding Lugs | Single |
| Fan Cover Material | Steel |
| Tropicalized Painting | Without |
| Bearing Cap | No-Without Bearing Cap |
| Balancing Method | 1/2 Key |
| Drip Cover | Without |
| Overload Protector (phenolic) | Without overload protector |
| Connection Cables Quantity | 6 |
| Fan Material | Plastic |
| Screw Cap | STAINLESS STEEL AISI 316L |
| NDE Bearing Seal | V'Ring |
| DE Bearing Seal | V'Ring |
| Cable Press Material | Sem |
Specifications
| Standard | NEMA MG-1 |
|---|---|
| Voltage | 460//220-240/380-415 V |
| Frame | 90L |
| Enclosure | IC411 - TEFC |
| Flange | Without |
| Terminal Box | Right position |
| Output | 2 HP (1.5 kW) |
| Number of Poles | 4 |
| Frequency | 60/50 Hz |
| Synchronous Speed | 1800 rpm |
| Rated Speed | 1435 rpm |
| Slip | 4.33 % |
| Rated Voltage | 220/380 V |
| Rated Current | 5.56/3.22 A |
| L. R. Amperes | 36.2/20.9 A |
| LRC | 6.5 |
| No Load Current | 2.68/1.55 A |
| Rated Torque | 7.32 ft.lb |
| TLocked Rotor torque | 229 % |
| Breakdown Torque | 250 % |
| Locked Rotor Time | 25s (cold) 14s (hot) |
| Moment of Inertia (J) | 0.1566 sq.ft.lb |
| Design | N |
| Insulation Class | F |
| Temperature Rise | 80 K |
| Duty Cycle | S1 |
| Starting Method | Direct On Line |
| Ambient Temperature | -20°C to +40°C |
| Altitude | 1000 m.a.s.l. |
| Degree of Protection | IP55 |
| Enclosure | IC411 - TEFC |
| Mounting | Foot-mounted, B3L(E) |
| Rotation | Both (CW and CCW) |
| Noise Level | 49.0 dB(A) |
| Approximate Weight | 54.4 lbs. |
| Efficiency | 50% at 85.0 75% at 85.3 100% at 85.3 |
| Power Factor | 50% at 0.63 75% at 0.75 100% at 0.83 |
Documents
Related Products
MM07552-AP
AC Motor (0.75 HP, 3600 RPM, D71 Frame)