AMP1860CCNL

Non-corrosive, non-conductive, light weight with lower installation cost, easy to modify and longer life cycle compared to steel. Rigid design with back panel inserts plus nonmetallic mounting brackets and a gasket system encased in a continuous channel on the cover.

Enclose and protect electrical and electronic controls, instruments or components for indoor and outdoor applications. Especially well suited for extreme temperature and corrosive environments.

• UL 508A, UL 50 and UL 50E Types 1, 2, 3, 3R, 4, 4X, 12 and 13
• Complies with:
  1. EN / IEC 60204-1 and 60529 Type IP66
  2. RoHS directive

Enclosure Type	JIC Size
Cover Type	Clear Polycarbonate
Closure Type	Nonmetal Snap Latch
Mounting Description	Nonmetal feet fastened to back side brass inserts
Height	18.04 in (458.216 mm)
Width	16.04 in (407.416 mm)
Depth	9.81 in (249.174 mm)
Usable Depth	10.27 in (260.858 mm)
Volume	3183 cu. in. (52160139.3 cu mm)
Color	Gray (RAL 7035) with clear cover
Material	Polycarbonate box and clear polycarbonate cover
Additional Materials	316 stainless steel external hardware (hinges/latches/fasteners), Polycarbonate mounting brackets, Plated carbon steel internal hardware, Brass inserts, Polyurethane (FIP) Formed-In-Place gasket system

One Year “Bumper to Bumper” Warranty – Allied Moulded Products, Inc. warrants its Industrial Electrical Enclosures to be substantially free from defects in materials and workmanship when used in applications considered normal use for one year from the date of original shipment from our factory (or warehouse) or one year from documented field installation, not to exceed 24 months from the original shipment date from Allied Moulded. This “Bumper to Bumper” warranty covers the standard color fiberglass enclosure as well as hardware, modifications, and accessories supplied by Allied Moulded as part of the original enclosure. This warranty expressly does not cover damage related to after-market or field modifications, repairs, misuse, handling, neglect, accident, improper storage, shipping damage, installation, or assembly damage. Any enclosure deemed defective during the warranty period will be either repaired or replaced at Allied Moulded’s sole option. Repair or replacement of the enclosure in question along with any pre-approved, reasonable labor costs will constitute complete fulfillment of Allied Moulded’s liabilities.