With a modern design and power ranging from 0.25 to 175 cv (0.18 to 132 kW), the CFW500 frequency inverter is a high performance variable speed drive, which assists in controlling speed and torque of three-phase induction motors. The device offers sensorless vector, vector with encoder or scalar control modes, permanent magnet motor control, SoftPLC, which adds PLC (Programmable Logic Controller) functions, STO and SS1 Safety Functions, Pump Genius, which brings dedicated pumping functions, and selectable plug-in modules, providing a flexible and optimized solution for any application.
NEMA Rating
Main Characteristics - Weg CFW500B10P0T4DBN1
- Output current from 1.0 to 211 A (0.25 to 175 cv / 0.18 to 132 kW);
- Single-phase or three-phase supply voltage 200-240 V or 380-480 V;
- Scalar Control (V / F), Vector Control (VVW), Sensorless Vector or Vector with Encoder Control and Permanent Magnet Motor Control (VVW PM);
- Selectable plug-in modules;
- Plug and Play philosophy;
- Built-in operating and programming interface (HMI);
- Built-in RS485 port (in any selected plug-in module);
- Pump Genius: functions dedicated to driving pumps;
- Safety Function: STO and SS1 level SIL 3 / PLe;
- SoftPLC - built-in PLC functionalities;
- Braking IGBT (available from frame B);
- 3C2 or 3C3 protection class for application in environments with corrosive chemicals;
- IP20 (standard) and NEMA1 (optional) protection ratings;
- Fan with quick exchange system;
- Internal RFI filter (optional);
- USB communication port (CFW500-CUSB accessory);
- Free WLP and WPS programming software application available at Softwares.
Simplified Programming and Operation - Weg CFW500B10P0T4DBN1
- View, setting and command of all parameters
- Up to three parameters indication on the display, according to user selection
- Oriented start-up and grouped parameters
Flexibility and Performance - Weg CFW500B10P0T4DBN1
The CFW500B10P0T4DBN1 has a modern design, and it can be selected according to the application requirements, providing flexibility with excellent performance. In the plug-in module version, the CFW500-IOS module comes with the VSD. In the version without plug-in module, the desired plug-in module may be selected (always one plug-in module per VSD). All plug-in modules have built-in RS485 Modbus-RTU.
The installation of the CFW500B10P0T4DBN1 is simple, and its configuration and operation is intuitive with the navigation menus of the operating interface (HMI) with built-in LCD display. Using the flash memory module, it is possible to download the existing setting from one CFW500 to other units without powering them up.
Connectivity - Weg CFW500B10P0T4DBN1
The CFW500B10P0T4DBN1 can be connected to the main fast industrial Fieldbus communication networks, with protocols used worldwide such as CANopen, Profibus-DP, EtherNet/IP, Modbus-TCP, PROFINET IO and DeviceNet, according to the plug-in module selected. In addition, all plug-in modules come with serial interface RS485 Modbus-RTU built-in.
Features - Weg CFW500B10P0T4DBN1
- Password to protect the parameters J Special engineering units (RPM, ºC, Nm, mA, %, kW, kWh, among others)
- Backup of all parameters (via WPS software, memory card or memory of the CFW500)
- Possibility to save up to two different settings on the memory of the CFW500
- Setting of the switching frequency according to the application requirements
- Speed reference via electronic potentiometer
- Multi-speed with up to eight programmable speeds
- Slip compensation
- Manual or automatic torque boost (V/F scalar mode) or self-adjustment (VVW vector mode)
- Acceleration/deceleration ramps
- "S" type ramp
- DC braking
- Internal dynamic braking (frame size B and larger)
- PID controller to control processes in closed loop
- Flying start / Ride-through
- Sleep mode
- Skip frequencies or frequency ranges function
- Overload and over-temperature protection
- Overcurrent protection
- DC link voltage supervision
- Fault log
Applications - Weg CFW500B10P0T4DBN1
- Extruders
- Conveyor belts
- Roller table
- Fans / Exhausters
- Centrifugal pumps
- Granulators / Palletizers
- Dryers and rotary ovens
- Process dosing pumps
- Stirrers / Mixers
- Rotary filters
- Winding machines / Uncoiling machines
Specifications - Weg CFW500B10P0T4DBN1
Power Supply | 380-480 V |
---|---|
Input Phases | Three-phase |
Configuration | With options |
Rated Current (Normal Duty) | 10 Amps |
Rated Current (Heavy Duty) | 10 Amps |
RFI Filter | Without filter |
Enclosure Rating | NEMA 1 |
Dynamic Braking | Standard with braking |
Safety Stop | Not Available |
Electronic Supply | Not Available |
Frame Size | B |
Control Method - Induction Motor | V/f (escalar) and VVW |
Rated Efficiency | ≥ 97% |
Link Inductor | No |
Conformal Coating | 3C2 (IEC 60721-3-3:2002) |
SoftPLC | Yes, incorporated |
Temperature | -10 °C a 50 °C |
USB Port | Only with plug-in |
External filter | Not Available |
Memory Card | Not included in the product |
I/O Standard | 4 x DI; 1 relé NA/NF e 1 transistor x DO; 1 x AI; 1 x AO |
Accessory Module (Control) | CFW500-IOS |
Display | Numeric LCD |
Displacement Factor | 0,98 |
Product Certifications | UL, CE, C-Tick, CS and IRAM |
Digital Inputs - Quantity (standard) | 4 |
Digital Outputs - Quantity (standard) | 1 relay NA/NF and 1 transistor |
Analogic Inputs - Quantity (standard) | 1 |
Analogic Outputs - Quantity (standard) | 1 |
Encoder Interface | Only with plug-in |
RS-485 ModBus Port | Available in plug-in |
Ethernet Port | With accessory |
RoHS | No |
Height | 199 mm / 7.8 in |
Width | 100 mm / 3.9 in |
Depth | 160 mm / 6.3 in |
Weight | 1,2 kg / 2.6 lb |